My bursch has developed a large hole, and needs to be replaced. Before I buy another bursch, whats everybodys opinion?
This is a stock 74 2.0 engine, and I don't timetrial or autocross the car.
Try http://www.triadwestperformance.com
CCLINCAMP914
In an earlier post I mentioned that I had purchased a Bursch exhaust from the manufacturer (Horsepower Engineering) in Pasadena; I bought a "combo" version (two-piece with removable muffler). I will have the system ceramic coated (the header will be coated inside and out); the muffler supposedly can only be coated on the outside and if it rusts can be replaced separately. I have in the past tried an S&S system (two different times--wife liked the quiet sound) but they don't fit without some serious "persuasion"; the quiet factor is no longer worth the aggravation of the installation.
do a search for triad or muffler here and there will be a couple wav files from my car with a triad.
ok, I'm a nice guy.
Here's the pics of the butt.
There are 2 files, both wma files. 1st one is 900k second one is 1.2meg
http://www.moronthrottle.com/audio/muffler%202.wma
http://www.moronthrottle.com/audio/muffler%201.wma
Here is a link to the thread discussing the merits of the popular mufflers.
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=5643&hl=triad
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)