Printable Version of Topic

Posted by: neo914-6 Mar 27 2007, 08:54 PM

They are for a mid-size Mercedes, 300E

Let me know if / when you can do this and how much $

Posted by: Brew Mar 27 2007, 09:03 PM

What do you need done exactly, and where in CO? I'd be glad to help if I can.

Posted by: johnlush Mar 27 2007, 10:14 PM

Kinda depends on where in CO and what your schedule is. I'm planning a trip to the SJ area to pick up my car sometime this spring - dependent on the body shop schedule. I would have room for sure and would be glad to help for gas money.

John

Posted by: neo914-6 Mar 28 2007, 02:43 PM

They are located in Boulder, CO.

If you are certain you are available "soon" and know what you want for the service let me know. The parts may not be available unless I purchase them now.

Thanks!

Posted by: Ferg Mar 28 2007, 02:49 PM

I'm in Boulder, if I can help, let me know.

Ferg

Posted by: johnlush Mar 28 2007, 06:51 PM

PM sent.

Posted by: neo914-6 Mar 28 2007, 11:39 PM

Hey Ferg or Brew,

Any trips to Cheyenne, WY? if the parts can get there I may have transport from there to SJ in ~May...

Posted by: Ferg Mar 29 2007, 12:18 AM

You mean drive to Wyoming on purpose

Just kidding John

I don't see me getting up there before May

Ferg

Posted by: LarryR Mar 29 2007, 01:10 AM

Grey Hound is actually great and cheap for just those kind of parts. I had a full roll cage and 4 fender flares delivered for 75 bucks!

Good Luck...

Posted by: Brew Mar 29 2007, 07:07 AM

That's the way to go, unless Lush is coming down to Denver betwixt now and the time he leaves.

I rarely get north of south Denver. Too flat.

Posted by: johnlush Mar 29 2007, 09:09 AM

You Colorado guys...

We'll see if we can work something out for Felix.

Posted by: Gint Mar 29 2007, 10:25 AM

Hey Felix, John, Ferg...

How about this plan:

John, if you're the transport mechanism in May, then Felix can have Ferg pick up the doors, and if Ferg can store them for a bit, I can get them up to Wyoming to John. In fact, we could do a 914 run up to the windy state or something. But I can commit to getting them up to John's place.

Posted by: johnlush Mar 29 2007, 10:47 AM

Sounds perfect to me!

And Felix can drop by the shop where my car is in SJ and encourage them to get it ready!

Never underestimate the collective power of car nutz.

Posted by: Ferg Mar 29 2007, 02:39 PM

Felix,

If that is the plan, PM me where and when to pick them up in boulder. Will they fit in a Xterra? If not I'll figure it out, I may be able to borrow a truck.

Ferg

Posted by: neo914-6 Apr 1 2007, 01:09 PM

Guys,

the parts are a hood 50"x53" and two fenders 50"x30". Let me know if you can fit these.

Thanks!

Posted by: johnlush Apr 1 2007, 10:57 PM

No problem on my part.

John

Posted by: Gint Apr 2 2007, 07:38 AM

I can toss that stuff in the back of my truck, No sweat...

So John, you're not heading out with the stuff until May?

Posted by: johnlush Apr 2 2007, 08:35 AM

Mike, I'm at the mercy of the body shop's schedule. But you're welcome to bring it up here any time.

Posted by: Gint Apr 2 2007, 08:43 AM

I'm going to be trying to coordinate that with a trip to Salt Lake...

Posted by: johnlush Apr 2 2007, 09:18 AM

Car related trip or work? I have a pair of calipers at Eric's that could be picked up if you see him, providing they are ready then. I'll be passing through SLC too so if there is anything I can deliver/pickup that would save you a trip...

Posted by: Gint Apr 2 2007, 09:56 AM

/6 tub needs needs to go to Troy for some paint work.

Posted by: johnlush Apr 2 2007, 10:28 AM

Ahh... Sounds like I need to catch up on the status of your project!

Posted by: neo914-6 Apr 2 2007, 12:57 PM

Mike,

Glad you can think about these things after the jackstand incident. It got me thinking more about my old stands so now I have so much supports that I can't get to things...