Like it says does anyone have the part number or know what year the master cylinder come off?
I seem to remember it was from mid60s MB sedans. If I can find my extra one, I'll get you the number.
Here ya go:
http://www.benzworld.org/forums/
what brakes are you using to utilize a 23mm mc?
Thanks not sure where to find the info I need on the M-Benz forum though do you know what model it came off of I am going to try to get one tomorrow
I need a new master cylinder and instead of buying two master cylinders I want to go with the bigger one ( I know the pedal will be harder but it will allow me to upgrade in a few months)
what calipers though?
Tony,
Call Autobahn Motors on Spring Street in Louisville. They are a Mercedes shop specializing in older MB's. If you can, talk to Art, he is a MB mechanic, but he used to race VW's years ago and also knows 914's well. He may be able to help you.
If you can't get Art, talk to Don McCoy, he is the main owner, but they are all partners.
Tell them Rich James told you to call them. Nice guys and they will help you out if they can. They are all good guys and volunteer every onece in a while to work on the old German tanks at the Fort Knox Museum. They have pictures of them driving those things around down there.
Rich
these guys have em.....
http://www.vehiclecraft.com/Brakes/vciweb4.htm
scroll down the bottom...
I've got an extra one that's brand new if you want it. Let me know.
Dan
The best kit I found is Smart Racing. It includes all the parts you need
http://www.smartracingproducts.com/pdfcat/srp2006_wheelsbrakes.pdf
including the longer rod. I think is is about $150 complete.
Van914
Thats the route I go I just needed to try to get one this weekend this car hasn't moved in over twenty years and all I need now is a master cylinder I have one that will be here today from the local parts place.
Does anyone know the model? I can get the part number if I have a model. I think theirs two different ones for early MBs...Help!
if we get you the PN can you get us the model number?
yup, no prob. Just need one or the other...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)