914World.com [Powered by Invision Power Board]

Posted by: xitspd Apr 13 2007, 05:59 PM

Does any one know who makes an after market E Brake for a 914-6 that fits Twin Turbo Big Reds?

Thanks,

Dan

Posted by: r_towle Apr 13 2007, 06:06 PM

Ask Marty at MSDS

Posted by: Aaron Cox Apr 13 2007, 07:49 PM

QUOTE(r_towle @ Apr 13 2007, 05:06 PM)

Ask Marty at MSDS

he was making a bolt on spot caliper solution that worked with boxster calipers.

im going the 911 ebrake drum route. bolts on and should works with vented 911 rotors.

Posted by: iamchappy Apr 13 2007, 09:33 PM

I just finished up making my ebrake setup using the ebrake drums from a 73 911. Check the classics thread on the how to... it's fairly easy...

Spot calipers will still need some sort of mounting ears welded on and some way of
getting juice to them or a cable.

Posted by: Aaron Cox Apr 13 2007, 10:07 PM

QUOTE(iamchappy @ Apr 13 2007, 08:33 PM)

I just finished up making my ebrake setup using the ebrake drums from a 73 911. Check the classics thread on the how to... it's fairly easy...

Spot calipers will still need some sort of mounting ears welded on and some way of
getting juice to them or a cable.

did you do a belcrank to activate them? thats what i have left to do.

Posted by: iamchappy Apr 13 2007, 10:14 PM

I havent gotten to that yet, I have a few other ideas I may try which would use a cable sheath stop tube and pull the ebrake speaders with the cable, much like the factory setup.

Posted by: skline Apr 14 2007, 09:31 AM

Doesnt Renegade make an E-brake setup? I think Dekman has them on his car.

Printable Version of Topic

Click here to view this topic in its original format