I can not guarantee that the spark from my coil pack is going to the right cylinder. I have a mega jolt with a 6cyl 3x2 coil pack. I know I am getting spark, but if it is synchronized with the correct cylinder is anyones guess. I am thinking that I will degree the crank pully and see when the individual plugs fire via timing light and then I can know for certain which coil is which. Unless someone can tell me for certain which coil is which on the 6 cyl Ford coil pack, this seems like a deacent way to go.
So:
Which cylinders fire at which degree?
Thanks
What are you asking?
Firing order on a 911 engine is 1-6-2-4-3-5
Let's just say for instance.
Cyl 1 = 0deg
Cyl 6 = 120 deg
Cyl 2 = 240 deg
Cyl 4 = 360 deg
Cyl 3 = 480 deg
Cyl 5 = 600 deg
These degrees are just the baseline. The whole group will vary depending on what advance is being run.
I take it you are running without a distributor.
good luck
P.S. I drove my 6 today. Runs pretty good.
That gives me some clarity of thought. If it aint endometrial cystadenocarcinoma I am having a hard time getting my head around it. Now I can start figurating my problem.
Thanks!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)