Now that I have my console wired correctly ( I hope) my temp gauge does not seem to work, I was wondering if the temp indicator on the Speedometer gage is connected to the same sensor that the console gauge is using when I unplugged the green/black from the harness and hooked up the console. The temp gage on the Speedo had worked before so that’s why I am wondering if that would be an indication that my new gauge is T/U
Confusing post I apologize
Neal
It is working but the readout is low, I think I need to clean the contacts on the gauge
I dont get it ? Your speedo has a temp gauge ?? Only the 1974 2.0 cars with no center console had a temp gauge in the same cluster as the fuel gauge.
B
Good catch Brad, I just went and looked, I have a combo Temp/Fuel gauge on the left then a speedo and then a tach. I just drive it every day so how should I remember what the dash looks like. Is there a way to
check to see if a temp gauge is reading low ?, like I said the original temp gauge reads higher than the console gauge.
Neal
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)