Printable Version of Topic

Posted by: mills914/s Apr 26 2007, 08:31 AM

Where is the cheapest place to get a flywheel for a 1972 1.7 914?
I need a good flywheel really fast where do I get one. New or used/resurfaced? If I have to I guess I can buy a new one for 300. Who has the best prices for resurfaced?
MUST get ready for Ramble!!!!
Seth


Attached image(s)

Posted by: Teknon Apr 26 2007, 08:53 AM

Evilbay of course.
http://cgi.ebay.com/ebaymotors/PORSCHE-914-RECONDITIONED-FLYWHEEL-1970-76-1-7-1-8-2- 0_W0QQcmdZViewItemQQcategoryZ33732QQihZ015QQitemZ250035636345QQrdZ1QQsspagenameZ
WD1V
There are four there right now. But maybe a 914 bro will chime in an get you one

Posted by: mills914/s Apr 26 2007, 08:58 AM

TEKnon do you have experiance with these MOFOCO's I have seen them But I dont know Have you used one ? I heard you can only turn 914 flywheels like once or twice before there are junk.

Posted by: addwestern Apr 26 2007, 09:08 AM

I've got em.

Nate

Posted by: 914Sixer Apr 26 2007, 12:44 PM

I have a place for new ones for $200 plus shipping.

Posted by: Jenny Apr 26 2007, 10:06 PM

you could try High Performance House in Redwood City. Call and ask for Rich.

High Performance House
2431 Spring St
Redwood City, CA 94063

(650) 364-6234

Jen

Posted by: Eric_Shea Apr 26 2007, 10:09 PM

Somebody give this guy a flywheel... or... just have your's resurfaced at a local machine shop.

Check with the Crusty'one. I think there's a procedure to get them right but, I'd bet that's your best bet.

Posted by: mills914/s Apr 26 2007, 10:59 PM

Thank you Everybody I have been taken care of in the flywheel dept. Someone hooked me up with a good one.
I have all my parts to do my clutch now.Brand new Sachs PP clutch and throw out.// Used but good resurfaced FLywheel.
914World is the best.