Hi everyone...I'm a newbie but been around a while soaking up knowledge. Thanks to all who spend so much time keeping the 914s of the world alive and kicking.
Anyway, my 2.0 has a set of Weber carbs that I believe are set up right but my neighbors have little kids and they are gettin sick of hearing the pop...sputter...pop in the mornings. When its warm the car runs and idles great but I'm entertaining going back to stock (or better) FI. The car has been carbed for 20+ years now so everything FI is long gone.
Can you guys start a list for me of what I'll need and what I should pay to convert back over. (or maybe someone has a complete set-up they'd like to sell).
BTW ...I have a Mallory Unilite - will that effect things?
Thanks!
Jeremy
stock, rat9550 or web73 cam if then changed out your cam when they converted to carbs...
hope they didnt. cuz that means a bottom end rebuild if they did.
-jim
Just get the carbs rebuilt and tuned. Art Thraen at ACE in Salt Lake can have them back to you in a week. While I agree that if someone has changed the cam, you will have a really hard time tuning it with the EFI I suspect that it will not be a RAT 9550 as the RAT was probably only 15 years old 20 years ago when your mods were done.
I have a complete 2.0L Djet FI setup that I have reconditioned/checked. (all of Andy's list)
PM me if interested.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)