Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Who makes an in dash tach?

Posted by: chris914 Apr 29 2007, 10:57 PM

Is there an in dash tach that will work with my MSD without the MSD tach adapter that wouldn’t break the bank?

Posted by: SirAndy Apr 29 2007, 11:33 PM

QUOTE(chris914 @ Apr 29 2007, 08:57 PM) *

Is there an in dash tach that will work with my MSD without the MSD tach adapter that wouldn’t break the bank?


autometer

Posted by: ninepfourteen Apr 30 2007, 05:43 AM

QUOTE(chris914 @ Apr 30 2007, 12:57 AM) *

Is there an in dash tach that will work with my MSD without the MSD tach adapter that wouldn’t break the bank?



Autometer from Summit Racing. ~$125.00

The pedestal type 5" will fit in dash. Wrap some tape just behind the bezel and it friction fits like the stock tach.

Posted by: machina Apr 30 2007, 07:19 AM

QUOTE(ninepfourteen @ Apr 30 2007, 06:43 AM) *

QUOTE(chris914 @ Apr 30 2007, 12:57 AM) *

Is there an in dash tach that will work with my MSD without the MSD tach adapter that wouldn’t break the bank?



Autometer from Summit Racing. ~$125.00

The pedestal type 5" will fit in dash. Wrap some tape just behind the bezel and it friction fits like the stock tach.


i have one of the cheaper autometers, fit right in the stock hole and works perfectly. i even used the stock rubber gasket to make it a tight fit.

Posted by: marks914 Apr 30 2007, 08:58 AM

I don't think they will work without the MDS adapter

Mark

Posted by: machina Apr 30 2007, 09:16 AM

QUOTE(marks914 @ Apr 30 2007, 09:58 AM) *

I don't think they will work without the MDS adapter

Mark


i have mallory ignition and dizzy with carbs, don't know about using it with stock FI or other ignition.

Posted by: Aaron Cox Apr 30 2007, 10:00 AM

you can run a tach adapter or do an easy mod to your stock tach....

Posted by: chris914 Apr 30 2007, 05:05 PM

Has anyone used this one for $83.25?

http://www.egauges.com/vdo_mult.asp?Type=Tachometer&Series=Vision

Posted by: Aaron Cox Apr 30 2007, 05:43 PM

other than being small....

whats wrong with your tach????

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)