Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Part identification

Posted by: KaptKaos May 6 2007, 11:20 PM

So I have this spare MPS. I don't know if its a 1.7 or 2.0 model. It has 2 sets of numbers on it. They are:

0 280 100 041
022 906051E

Ok, so does anyone know which one this is? Also, how do I test to see if it is still functional?

This will likely wind up on the parts forum at some point, so any guidance on reasonable selling price is appreciated as well.


Attached image(s)
Attached Image

Posted by: SLITS May 6 2007, 11:52 PM

041 was a VW 1.7L possibly 1.8L based on the OE. I can look it up tomorrow.

1.) You need to pull a vacuum on it to 15" - 20". AFAIR, it shouldn't leak down more than 5 lbs in 5 minutes ..... PBanders site has the specifics.

2.) You should check the ohm value between the pins. AFAIR, it's 90 ohms between the two inner conections and 350 ohms between the two outer pins. (it could be the other way around too!)

I've sold them for $50 - $75

And it appears to have been rebuilt in its' life ..... the halves are held together with screws not rivits.

Posted by: KaptKaos May 7 2007, 12:10 AM

Thanks Ron.


Posted by: Cap'n Krusty May 7 2007, 01:02 AM

No VW 1.8 had D-jet. The Cap'n

Posted by: bd1308 May 7 2007, 11:42 AM

And no VW 1.7 had L-Jet wink.gif

Posted by: KaptKaos May 7 2007, 02:01 PM

Thought it was only a choice between 1.7 and 2.0.

Can anyone search that part number?

Posted by: davep May 7 2007, 02:47 PM

1.7
the 2.0 had an 039 part #, not the 022

Posted by: SLITS May 7 2007, 03:12 PM

Bosch 0 280 100 041

08/1971 to 07/72 VW-Porsche 1.7L

From 10/69 to 04/70 they used the 003 on the 1.7L engine.
From 05/70 to 07/71 they used the 019 on the 1.7L engine.
From 07/1972 onward they used the 049 on the 1.7L engine.

Posted by: KaptKaos May 8 2007, 12:18 AM

Thanks Ron.

Anyone need one?

Posted by: Aaron Cox May 8 2007, 11:39 AM

QUOTE(KaptKaos @ May 7 2007, 11:18 PM) *

Thanks Ron.

Anyone need one?


is it known good? chair.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)