maybe 18 to 24 inches longer needed for my v8 conversion.
jim
terry cable made one for me...
(800) 854-4691
I made my own cable. Use either 1/16" or 3/32" wire cable - buy at the hardware store for 10 cents per foot. Buy the right size cable tube (for either a 1/16" or 3/32" cable) from a motorcyle shop. Buy a carburetor-end connector from your local auto parts store. Drill and tap the accelerator pedal connector and use set screws to hold the cable in place. Set up a support terminal on your intake manifold. Run the cable around the back of the engine in a large arc. Lightly lube the cable in the tube. It will run very smooth.
Attached image(s)
Nice tip Nick, that looks good.
-Rob
Sorry for the hijack...
Hey Nick! Did you get your car painted? I see blue in your avatar pic. Show us some more pics eh! Big ones. Start a new thread or something, but...
nick, machina and all
thanks for the guidance : )
jim
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)