Printable Version of Topic

Posted by: bd1308 May 10 2007, 11:14 AM

I am building a CNC suitable for milling circuit boards, and am looking for a good core for both the 1.7 and 2.0L D-Jet engines.

Let's get to the parts boxes, find those good TPSs, and send em to me!

I will make a replacement board to be riveted in place, ensuring years more of 'car-shuddering at 3000rpm' free fun!

Posted by: jimkelly May 10 2007, 11:19 AM

i think i can help you out - i doubt you need truely perfect one working ones - you just need the various dims i'm guessing ??

per pelicanparts

0-280-120-042 Throttle Switch, 914 1.7 (1970-71), Each
No Longer Available
0-280-120-021 Throttle Switch, 914 1.7 (1972-73), Each
No Longer Available
0-280-120-201 Throttle Switch, 914 1.8 (1974-75), Each
No Longer Available

039-906-111-A-M114 Throttle Switch, 914 2.0 (1973-76), Each
Brand: Bosch [Photo] [view in parts diagrams]
No Longer Available

Posted by: bd1308 May 10 2007, 11:39 AM

having defined traces would be nice as well, but I would assume that would also fall under dimensioning....

Posted by: bd1308 May 10 2007, 11:41 AM

You also brought up two points:

*there are TWO types of 1.7L TPSs

*The 1.8 TPS isnt a 'typical' TPS- it only contains Idle contacts and WOT contacts, none of the transitional A/B contacts in between as found on the 1.7/2.0 models.


Just doing my part to seeing that YOU get a functioning 914

Posted by: zymurgist May 10 2007, 12:02 PM

This is awesome news!

Posted by: jimkelly May 10 2007, 04:05 PM

i have and 021 and a 032 i can send you - pm me your address - jim

Posted by: drewvw May 10 2007, 07:33 PM

Did you get the memo...about the new coversheets for the TPS Reports...

Posted by: blitZ May 10 2007, 08:09 PM

I know, I know... Office Space, yeeeaaahhh.

Posted by: jimkelly May 11 2007, 03:52 PM

is this already another member vendor project that has been canned ???

jim

Posted by: Aaron Cox May 11 2007, 04:15 PM

accounts payable.... this is nina speaking.... just a moment.....

Posted by: bd1308 May 16 2007, 09:18 PM

Jim!

Thank you !

I could use these, you get freebies once they're made.



pm'ing u the addy