Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Generator light

Posted by: ruddyboys May 13 2007, 07:24 AM

Wondered why my generator light never came on, It's because there aint any!!! The battery does charge so I looked behind the dash for a roaming extra socket and buld by no gots. What are the color of the wires that go to the socket?

Posted by: bd1308 May 13 2007, 10:11 AM

thats really odd. Theres a blue wire that needs resistance (from a bulb) that makes everything start(on the alternator)

Posted by: SirAndy May 13 2007, 03:50 PM

QUOTE(bd1308 @ May 13 2007, 08:11 AM) *

thats really odd. Theres a blue wire that needs resistance (from a bulb) that makes everything start(on the alternator)


agree.gif it's a blue wire. the second one should be red/white. the blue wire goes to pin 2 on the relay board.

the circuit won't function correctly without the bulb ...
bye1.gif Andy

PS: grab yer haynes manual ...

'74 (if you're not afraid of current flow diagrams), page 175, upper left corner, K2 is the bulb

otherwise, use the diagram on page 164 (which is for a '73, but that part is identical)

Posted by: ruddyboys May 13 2007, 05:11 PM

found the socket way down behind the dash, BUT I tested the blue end wire with the blue wire at the voltage reg and there was a break somewhere, and I found it!!!! The PO cut the wire under the console, split it into 2 wires and nither of them conected to the socket. I fished the wire from the socket and splice all together and it works...

Posted by: Toast May 13 2007, 06:52 PM

clap56.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)