Printable Version of Topic

Posted by: skline May 13 2007, 08:19 PM

I am at Sklines. I know there is a thread somewhere for by passing the fuel pump relay.

You guys know how to do it???

Clayton

Posted by: McMark May 13 2007, 08:22 PM

Pull the relay out and make a jumper wire between pins 87 and 30.


Attached image(s)

Posted by: McMark May 13 2007, 08:23 PM

I hope he remembers to turn the key on....

Posted by: skline May 13 2007, 08:30 PM

Well, at this point, we aint got no spark, so there is more of a problem than just the fuel pump.

We are trying to get the parts car to run, just to see if we can. Good way to kill some time.

Posted by: iamchappy May 13 2007, 08:34 PM

Look here
http://www.914world.com/specs/SirAndyCarbFuelPumpRelay.php

Posted by: skline May 13 2007, 08:56 PM

Thanks Chappy,,


OK, I have 2 wires going to the fuel pump.

one blue with a red stripe, And 1 that looks orange.

Which one is the 12 VDC hot?

This is a 72 car.

Clayton

Posted by: SirAndy May 13 2007, 09:06 PM

fuelpump has two wires, one black/red (comes from pin 13 on the relay board) and
one brown ground wire ...
Andy

PS: get a haynes manual!