Anyone know the offset of the stock 5.5" steel wheels that came with hubcaps? I'd like to run them on my Beetle (fender rubbing issue with empi's and a lowered stance) but I'm not sure they will work. Like to take some measurements before I try to buy some.
Thanks,
Chris
beetle wheels have a bigger offset iirc, which makes them stick outward too far on a 914.....
so a 914 wheel on a beetle would sit farther inboard
Yeah, thats what I am counting on, but I want to know by how much!
Anyone got a set they want to measure for me (then maybe sell to me)?
An earlier post on this site said, VW wheels were ET=26mm, and (all?) 914 wheels were ET=41mm. Measurements I made last weekend were pretty close:
914 Pedrini offset ~ 42mm
Am-Racing LeMans (VW) offset ~ 27mm
the difference is ~ 15mm, so the change would buy you almost 5/8" additional clearance assuming same size tires . . . .
I've heard that all of the different 914 5.5" rims (Fuchs, Pedrini, Mahle, "steelies") are the same offset . . .
Hope this helps.
Steve A-
That is a big help, thanks! I'll check to see against the later, non hubcap steel wheels that I have along with the 8 spokes.
-Chris
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)