Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Aiming Bosch Fogs on a '75 Question

Posted by: jim_hoyland May 31 2007, 09:14 PM

Removed the rubber bumper for paint and general mainternce including the r/r of the fogs. The fogs are now reattached to the bumper and the bumper back on the chassis. Question is: how should the fogs be aimed ?

Attached image(s)

Posted by: eg914 Jun 1 2007, 12:28 AM

Here is a link to Daniel Stern Lighting for aiming lights, including fogs. I haven't tried it yet because I am so darn good at procrastinating! (I also need to find a nice vertical wall) I have seen similar information from other sources, so I think this should give good results.

http://www.danielsternlighting.com/tech/aim/aim.html

Posted by: jim_hoyland Jun 1 2007, 08:22 AM

Thanks Bill, That's really a complete resource with exactly what I was looking foor.

Posted by: Elliot Cannon Jun 1 2007, 02:22 PM

I've found that it works best if the lights are aimed FORWARD. Are you really driving the car to the WCR?
Cheers, Elliot

Posted by: jim_hoyland Jun 1 2007, 04:59 PM

Aim forward uh.....Can't fo the WCR, no vacation time available in June.