Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ maiden voyage for the new improved Puttputt
Posted by: Dan (Almaden Valley) Jun 11 2007, 12:47 AM
this coming Saturday June 16th should be my shake down AX with the new rebuild.
will only be able to do the morning runs, but at least the car will be competing again...if it doesn't fail at Candlestick, then it will probably last anywhere.
Now to get my driving back to scratch.
all my competition has 3 events under their belts ....time to kick some 911,964,993, and 996 hiney
my two top competitors are driving big hp cars. One is in a 993 running 8 and 10 inch wheels with DOT Rs and the other is running a 996 with limited slip, after market exhaust and DOT Rs on wide wheels.
and then there is the Puttputt on 205x50 Hankook Z211s, and 110HP and open diff....I guess I should spot them a cone or two
I'll report back after the event to let everyone know my observations of the 2056.
you can check my build thread here
http://www.914world.com/bbs2/index.php?showtopic=70629&hl=the+last+of+my+parts
Posted by: race914 Jun 11 2007, 09:58 AM
GO DAN!!
Anxious to hear how you & the new motor do!
Posted by: ConeDodger Jun 11 2007, 08:15 PM
this coming Saturday June 16th should be my shake down AX with the new rebuild.
will only be able to do the morning runs, but at least the car will be competing again...if it doesn't fail at Candlestick, then it will probably last anywhere.
Now to get my driving back to scratch.
all my competition has 3 events under their belts ....time to kick some 911,964,993, and 996 hiney
my two top competitors are driving big hp cars. One is in a 993 running 8 and 10 inch wheels with DOT Rs and the other is running a 996 with limited slip, after market exhaust and DOT Rs on wide wheels.
and then there is the Puttputt on 205x50 Hankook Z211s, and 110HP and open diff....I guess I should spot them a cone or two
I'll report back after the event to let everyone know my observations of the 2056.
you can check my build thread here
http://www.914world.com/bbs2/index.php?showtopic=70629&hl=the+last+of+my+parts
Great news Dan! I bet you will love the new power. Hey! Question about the Hankookies. What do their compound numbers mean? C30, C40, C50? All in the DotR tire.
Posted by: Dan (Almaden Valley) Jun 11 2007, 08:17 PM
this coming Saturday June 16th should be my shake down AX with the new rebuild.
will only be able to do the morning runs, but at least the car will be competing again...if it doesn't fail at Candlestick, then it will probably last anywhere.
Now to get my driving back to scratch.
all my competition has 3 events under their belts ....time to kick some 911,964,993, and 996 hiney
my two top competitors are driving big hp cars. One is in a 993 running 8 and 10 inch wheels with DOT Rs and the other is running a 996 with limited slip, after market exhaust and DOT Rs on wide wheels.
and then there is the Puttputt on 205x50 Hankook Z211s, and 110HP and open diff....I guess I should spot them a cone or two
I'll report back after the event to let everyone know my observations of the 2056.
you can check my build thread here
http://www.914world.com/bbs2/index.php?showtopic=70629&hl=the+last+of+my+parts
Great news Dan! I bet you will love the new power. Hey! Question about the Hankookies. What do their compound numbers mean? C30, C40, C50? All in the DotR tire.
Rob, from what I read it is their notation for wear rating so a C30 would be a WR of 30 My C50s have a WR of 50 on the DOT information on the sidewall.
Posted by: ptravnic Jun 11 2007, 08:39 PM
Dan - I may be mistaken, but did you have the Tangerine stub pipes installed in one of your rebuild pics? If so, can yuo describe the power from your fresh 2056?
I ask because I'm finishing up my own 2056 and will be getting my Tangerine's at the end of July (already ordered/deposit, etc).
If'n I'm mistaken - congrats on finishing up the rebuild!
-pt
Posted by: ConeDodger Jun 11 2007, 08:44 PM
Dan - I may be mistaken, but did you have the Tangerine stub pipes installed in one of your rebuild pics? If so, can yuo describe the power from your fresh 2056?
I ask because I'm finishing up my own 2056 and will be getting my Tangerine's at the end of July (already ordered/deposit, etc).
If'n I'm mistaken - congrats on finishing up the rebuild!
-pt
Those were probably mine. I think Dr. Dan is using early SSI HE and a muffler"
Attached image(s)
Posted by: Dan (Almaden Valley) Jun 11 2007, 08:46 PM
Dan - I may be mistaken, but did you have the Tangerine stub pipes installed in one of your rebuild pics? If so, can yuo describe the power from your fresh 2056?
I ask because I'm finishing up my own 2056 and will be getting my Tangerine's at the end of July (already ordered/deposit, etc).
If'n I'm mistaken - congrats on finishing up the rebuild!
-pt
thanks Pete, my stub pipes are for my Eurorace header set up.
I would love to have a set of CFR headers but that would be about the cost of my motor build...maybe next year.
I am still dialing in the motor and will have a full report after a few AX runs this Saturday. It sounds really healthy, I will be driving the car tomorrow and will have some initial impressions.
Good luck with your build. Did you get any parts from Jake?
I used KB pistons and a 9550 cam from him.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)