I pulled the Dash wires and spilled brake fluid on the homemade diagram.
I was able to figure out everything I destroyed except for the tach wires
on the back I have:
12V, 1, and -, markings
The Neg I assumed brown, I have a black/purple wire
Any help is appreciated.
It is a 75 1.8L
thanks in advance
Red/white is keyed hot
Brown is Ground
Black/Purple is tach signal
Bravo Mr. Mohawk
BJH
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)