Posted by: RohJay Jul 10 2007, 08:17 AM
Can i please see some photos of '70-71 Passenger Seat/Back?
I need to have a Passenger Seat/Back fabricated for my '70.
It has to be fabricated as mine is RHD converted
Posted by: por73914 Jul 10 2007, 08:28 AM
QUOTE(RohJay @ Jul 10 2007, 09:17 AM)
Can i please see some photos of '70-71 Passenger Seat/Back?
I need to have a Passenger Seat/Back fabricated for my '70.
It has to be fabricated as mine is RHD converted
I would like to see pictures of you RHD conversion!
Posted by: RohJay Jul 10 2007, 09:03 AM
I will post some detailed pics soon enough.
but till then please look in my intro post below for some pics.
http://www.914world.com/bbs2/index.php?showtopic=71454&hl=
Posted by: por73914 Jul 10 2007, 09:18 AM
Great Link love the cars! Thanks
Posted by: RohJay Jul 10 2007, 10:51 PM
Anyone?
If you already have a pic up on the World, please give link.
TIA
Posted by: markb Jul 10 2007, 10:53 PM
I can take some pics tomorrow if you still need them.
Posted by: RohJay Jul 10 2007, 11:10 PM
YES! please. Thanks Mark!
EDIT: markb came through with the required photos and advice. Mega thanks Mark
Posted by: davep Jul 11 2007, 11:18 AM
Unless you want to be a CW, and stay with the original early style, then I suggest finding a 1972 or later set. The early style has the passenger seat as part of the wall covering. From 1972 they had individual adjustable bucket seats. This meant the wall covering was basically symmetrical. The seats were as well (essentially). This would require new seat mounting hardware to be added. Did they already swap the seat mounts?
Posted by: RohJay Jul 12 2007, 09:41 AM
QUOTE(davep @ Jul 11 2007, 10:48 PM)
Unless you want to be a CW, and stay with the original early style, then I suggest finding a 1972 or later set. The early style has the passenger seat as part of the wall covering. From 1972 they had individual adjustable bucket seats. This meant the wall covering was basically symmetrical. The seats were as well (essentially). This would require new seat mounting hardware to be added. Did they already swap the seat mounts?
I really do like the early single adjustable seat setup. Gives an old "vintage-racer" feel to the car
Currently the driver's seat (RIGHT side) is fine: i believe they have merely transferred the seat from the Left side. The current passenger seat (LEFT side) appears to be put together with the original Rightside seat bottom and upright insert .
The late Backpad i have sourced needs to be re-upholstered anyway. So it wouldn't be too difficult to replicate an early backpad, MIRRORED. Will have to amalgamate the center and left side sections, incorporate a head restraint and re-cover.. within my upholsterer's skillset , at least i hope