Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Available next week
Posted by: GWN7 Jul 19 2007, 01:19 PM
Stacked elbow
Price to be determined in a few days.....
Attached image(s)
Posted by: dr914@autoatlanta.com Jul 19 2007, 01:25 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
Posted by: jsteele22 Jul 19 2007, 01:25 PM
Stacked elbow
Price to be determined in a few days.....
Way back when I had a running engine.... I had some weird vacuum leak issues that I couldn't track down, especially difficult b/c replacing all my vacuum lines didn't seem to make the issues go away completely. That piece was the culprit. A crack that was imposiible to see when it was pinched shut, but when bent (i.e., installed) opened up pretty bad. If I had an engine today, I'd buy one...
Posted by: GWN7 Jul 19 2007, 01:42 PM
They look like this one.....
Attached image(s)
Posted by: dr914@autoatlanta.com Jul 19 2007, 03:01 PM
this should probably be moved to the vendor section anyway!!!!!!!!!!!!!
Posted by: GWN7 Jul 19 2007, 03:09 PM
George Do you own a hat?
Posted by: TROJANMAN Jul 19 2007, 03:16 PM
Stacked elbow
Price to be determined in a few days.....
Way back when I had a running engine.... I had some weird vacuum leak issues that I couldn't track down, especially difficult b/c replacing all my vacuum lines didn't seem to make the issues go away completely. That piece was the culprit. A crack that was imposiible to see when it was pinched shut, but when bent (i.e., installed) opened up pretty bad. If I had an engine today, I'd buy one...
Seeing how i now own your engine, should I buy one?
Posted by: mstein95 Jul 19 2007, 03:20 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
George - My order for one from 6/15 was put on back order. Does this mean its been shipped?
Edit: Thanks for contacting me George - I look forward to receiving my part.
Posted by: brer Jul 19 2007, 03:24 PM
George Do you own a hat?
Oliver Hardy ?
Stooges?
Posted by: Johny Blackstain Jul 19 2007, 03:31 PM
Stacked elbow
Price to be determined in a few days.....
Way back when I had a running engine.... I had some weird vacuum leak issues that I couldn't track down, especially difficult b/c replacing all my vacuum lines didn't seem to make the issues go away completely. That piece was the culprit. A crack that was imposiible to see when it was pinched shut, but when bent (i.e., installed) opened up pretty bad. If I had an engine today, I'd buy one...
Seeing how i now own your engine, should I buy one?
Posted by: dr914@autoatlanta.com Jul 19 2007, 03:51 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
George - My order for one from 6/15 was put on back order. Does this mean its been shipped?
My intent again was not to hyjack anyone's good effort only to suggest that we need such good effort to make parts that others are not making so we can satisfy the 914 hunger for nla parts. Like the dash switch caps. (someone just posted) Someone needs to make these and we will buy from them!!!!!!
Posted by: GWN7 Jul 19 2007, 04:21 PM
Well George if your intentions are so good I'd suggest instead of wearing your hat (picture below) you go see why of the 100's you have in stock, why your staff hasn't sent one out to the guy with the back order.
And George, as I told you in the emails when you asked me to make these for you (why you would want me to make them when you have 100's in stock is beyond me), I was asked about making them at the WCC05.
I'm also glad your concerned about my efforts to make parts........but remember it's called the free enterprise system........I don't need to check with you before I do something
Attached image(s)
Posted by: McMark Jul 19 2007, 04:23 PM
You said it Bruce.
Posted by: brer Jul 19 2007, 04:34 PM
Oh, darn.
and I though the punchline was
THEN WHY DONT YOU GO SIT ON IT.
I admit,
I watch to many old movies
![popcorn[1].gif](style_emoticons/default/popcorn[1].gif)
Posted by: jsteele22 Jul 19 2007, 04:59 PM
Stacked elbow
Price to be determined in a few days.....
Way back when I had a running engine.... I had some weird vacuum leak issues that I couldn't track down, especially difficult b/c replacing all my vacuum lines didn't seem to make the issues go away completely. That piece was the culprit. A crack that was imposiible to see when it was pinched shut, but when bent (i.e., installed) opened up pretty bad. If I had an engine today, I'd buy one...
Seeing how i now own your engine, should I buy one?
No, I don't see any need for it. That part is only really useful for engines that run.
Posted by: TROJANMAN Jul 19 2007, 05:03 PM
Stacked elbow
Price to be determined in a few days.....
Way back when I had a running engine.... I had some weird vacuum leak issues that I couldn't track down, especially difficult b/c replacing all my vacuum lines didn't seem to make the issues go away completely. That piece was the culprit. A crack that was imposiible to see when it was pinched shut, but when bent (i.e., installed) opened up pretty bad. If I had an engine today, I'd buy one...
Seeing how i now own your engine, should I buy one?
No, I don't see any need for it. That part is only really useful for engines that run.
You are probably right. And running engines are only useful if they are actually in the car, right?
Posted by: SLITS Jul 19 2007, 06:03 PM
And it makes a rotten pot pipe ..... the rubber/plastic burns your lungs and makes you cough. 
Posted by: rhodyguy Jul 19 2007, 06:55 PM
you have to line it with foil stoner. nice work bruce. selfserving george.
k
Posted by: Dr Evil Jul 19 2007, 07:26 PM
Oh ya, like me, Bruce is a real vendor 
Bruce, you and I make parts when we can which, I fell, doesnt actually qualify us a vendors. More like the welfare recipients of the World site - work only sometimes, sit around and BS most of the time.
George, well.....ah, I aint got nothing nice to ask, or it always comes out bad so I wont 
Posted by: jimkelly Jul 19 2007, 08:09 PM
i guess the back order was an error if i read into the edit above correctly - just another fault in AA's customer service techniques??
i swear by PP - always used them - always will.
jim
Posted by: Engman Jul 20 2007, 03:00 PM
Well George if your intentions are so good I'd suggest instead of wearing your hat (picture below) you go see why of the 100's you have in stock, why your staff hasn't sent one out to the guy with the back order.
And George, as I told you in the emails when you asked me to make these for you (why you would want me to make them when you have 100's in stock is beyond me), I was asked about making them at the WCC05.
I'm also glad your concerned about my efforts to make parts........but remember it's called the free enterprise system........I don't need to check with you before I do something
You go Bruce - let me know when and how much. Your stuff is solid.
M
Posted by: hwgunner Jul 20 2007, 03:15 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
George - My order for one from 6/15 was put on back order. Does this mean its been shipped?
My intent again was not to hyjack anyone's good effort only to suggest that we need such good effort to make parts that others are not making so we can satisfy the 914 hunger for nla parts. Like the dash switch caps. (someone just posted) Someone needs to make these and we will buy from them!!!!!!
Help me out here. Can't a post be edited?? Wouldn't that be the right thing to do?? Is that to hard??? Did anybody else think of this???? Am I just too stupid to know better?
Posted by: dr914@autoatlanta.com Jul 20 2007, 05:20 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
George - My order for one from 6/15 was put on back order. Does this mean its been shipped?
My intent again was not to hyjack anyone's good effort only to suggest that we need such good effort to make parts that others are not making so we can satisfy the 914 hunger for nla parts. Like the dash switch caps. (someone just posted) Someone needs to make these and we will buy from them!!!!!!
Help me out here. Can't a post be edited?? Wouldn't that be the right thing to do?? Is that to hard??? Did anybody else think of this???? Am I just too stupid to know better?
of course it can this whole thing is stupid anyway. All i wanted to say is that we need more parts made for 914s! Lets end this
Posted by: hwgunner Jul 20 2007, 06:47 PM
Stacked elbow
Price to be determined in a few days.....
We have at least 100 immediately available now!!!!!
George - My order for one from 6/15 was put on back order. Does this mean its been shipped?
My intent again was not to hyjack anyone's good effort only to suggest that we need such good effort to make parts that others are not making so we can satisfy the 914 hunger for nla parts. Like the dash switch caps. (someone just posted) Someone needs to make these and we will buy from them!!!!!!
Help me out here. Can't a post be edited?? Wouldn't that be the right thing to do?? Is that to hard??? Did anybody else think of this???? Am I just too stupid to know better?
of course it can this whole thing is stupid anyway. All i wanted to say is that we need more parts made for 914s! Lets end this
Then end it by editing your post!!
ps-I know, I know I know!!!!!!!!
Posted by: hwgunner Jul 20 2007, 06:55 PM
[/quote]
We have at least 100 immediately available now!!!!!
[/quote]
I will translate for everybody-- The above sentence realy means "we need more parts made for 914s!"
Posted by: plas76targa Jul 20 2007, 10:00 PM
Bruce - count me in for one. It was I who asked at WCC05 - or maybe that was another vac line part..?
Posted by: type47 Jul 21 2007, 07:27 AM
i don't want to stir up the warm fuzzies flying back and forth, but i would like to know if there aren't 2 versions of the stacked elbow; one for the 1.7 and one for the 2.0? which is this or will it fit both?
Posted by: rhodyguy Jul 21 2007, 06:47 PM
not enough stacked quotes laid upon one another. 
k
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)