Hey guys nice site.
I have a question for the pros here. I have a 914 that has been flaired and yes sitting for 10 years as I have started to go completely through this car. I have a set of early 15x 6 and 15 x 7 Fuchs wheels from a early 911 5 lug of course. Since this thing has been sitting I almost ready to add the wheels on the car and at least put it back on the ground after doing a 5 lug conversion. I would really like a pair of 15 x 8 or 15 x 9 for the rear, but the wife said I need to keep both kindeys just in case, so I would like to fill up the rear wheel wells using the 15 x 7 rims and tires. My question is, I have rebuilt the hubs with new bearings and bushings, and the hubs are not pressed into the arms yet, anyway if I use a HUB CENTRIC WHEEL SPACER , what is the largest I can use? 1 inch, 1.5 inch? Any clue?
Any thoughts on bracing the rear trailing arms?
Thanks....Robert
Unless you are going to race it, IMHO you should not need to add bracing.
What flairs?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)