Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Clutch and throttle cable replacement

Posted by: whitey Sep 22 2007, 02:56 PM

Is the best way to remove these cable to pull from the firewall. Do you need to do them one at a time so they do not get crossed or can you remove both then install both.

Thanks, Dave

Posted by: Cap'n Krusty Sep 22 2007, 03:20 PM

QUOTE(whitey @ Sep 22 2007, 01:56 PM)

Is the best way to remove these cable to pull from the firewall. Do you need to do them one at a time so they do not get crossed or can you remove both then install both.

Thanks, Dave

Not only is it the best way, it's the ONLY way. Do 'em one at a time, and you still need to watch for tangles at the front. The Cap'n

Posted by: whitey Sep 22 2007, 05:15 PM

Thanks Cap'n...

Dave

Posted by: lotus_65 Sep 22 2007, 07:58 PM

let me know how it works out for ya!

paul

Posted by: Headrage Sep 22 2007, 08:14 PM

I gutted my /4 tub and re-installed them but the Cap'n is right.

It's much easier and safer to do them one at a time to prevent them from tangling...