Posted by: SirAndy Oct 1 2007, 07:21 PM
good evening!
today, i've been going through the details of what is needed to tackle the restoration of my original /6 and the most important thing i'm lacking is (work)space ...
so, i'm looking for a indoor workspace big enough to comfortably be able to work in and around a 914 that will spend most of it's time on a rotisserie.
there has to be plenty of space for parts bins and there will be a donor/partscar (original /6 as well) that needs to be stripped and cut up.
while i'd like to get this done fairly quick, realistically i'm probably looking at 6 months to a year.
this will be a ground up restoration. acid-dipping, lot's of cutting, grinding and welding etc.
so, needles to say, there will be noise. oh, and a compressor for air-tools would be a plus
if there's anybody out there that has such a space avaiblable (i'm willing to pay rent, of course!) or knows somebody who does, please contact me!
Andy
the car, '70 914-6 - 914.043.0374:
Posted by: jd74914 Oct 1 2007, 07:28 PM
What's the car you are cutting look like?
Posted by: SirAndy Oct 1 2007, 07:52 PM
QUOTE(jd74914 @ Oct 1 2007, 05:28 PM)
What's the car you are cutting look like?
donor looks nice and is a complete and running car!
unfortunately, the current owner got hosed on the deal as he paid for a prestine original /6 and it later turned out the car had been stitched together (and not in a good way) and the whole front clip starting at the rear firewall is from a early /4 ...
so, we're going to put all the original /6 parts to good use and use the rest of the car as a sheetmetal donor for mine.
Andy
Posted by: flesburg Oct 1 2007, 08:12 PM
I'm in Illinois, not too far to the east.
I have room. The rent would only be that you store it here when it is done, and leave me a set of keys so I can move it around a little...just a little....
Posted by: Eric_Shea Oct 1 2007, 08:14 PM
Just send it to Gunnar. It will be cheaper in the long run.
Posted by: McMark Oct 1 2007, 10:08 PM
Andy, the shop space three doors down from me is available. But you'll probably want to get a couple other people in on it. Rent is around $1000 a month. Same layout as my space but without the loft or workbench.
Posted by: SirAndy Oct 1 2007, 10:19 PM
QUOTE(McMark @ Oct 1 2007, 08:08 PM)
Andy, the shop space three doors down from me is available.
But you'll probably want to get a couple other people in on it. Rent is around $1000 a month.
Same layout as my space but without the loft or workbench.
woah. $1k a month is way too expensive. problem is, if i share it with other people then there isn't enough room for a rotisserie and parts car anymore ...
that's why your shop is out of the question in the first place ...
Andy
Posted by: Gint Oct 1 2007, 10:24 PM
My /6 is only 18 earlier than yours Andy.
Posted by: jd74914 Oct 1 2007, 10:51 PM
QUOTE(SirAndy @ Oct 1 2007, 09:52 PM)
QUOTE(jd74914 @ Oct 1 2007, 05:28 PM)
What's the car you are cutting look like?
donor looks nice and is a complete and running car!
unfortunately, the current owner got hosed on the deal as he paid for a prestine original /6 and it later turned out the car had been stitched together (and not in a good way) and the whole front clip starting at the rear firewall is from a early /4 ...
so, we're going to put all the original /6 parts to good use and use the rest of the car as a sheetmetal donor for mine.
Andy
Wow. Thats incredible
I take it that there was some VIN swapping going on.
Posted by: fiid Oct 2 2007, 06:48 PM
I'll put out an email on the california melee list for you and report back....
Fiidster.
Posted by: fiid Oct 2 2007, 06:52 PM
From the melee list:
QUOTE
So I'm about to sign a lease on a 4200 sf building in
San Leandro and
I thought I would let the group know I'm looking for
some renters.
The options are dead storage, active workshop and
everything in
between. There is also quite alot of outdoor space for
R/V or trailer
storage. Rates are dependant on the type of access you
require. Give
me a call for details. Very secure alarmed building on
a dead end street.
Duff
415-640-0978