Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ So who is going to Slits and Glenns all 914 swap meet?

Posted by: Twystd1 Oct 16 2007, 11:54 PM

So how many of you nut cases are going...???????????????????

I go every year. I love the gig... Tis good times.

It's good to see the SoKal and MidCal guys in one place.

The food rocks. Parts are cheap if ya haggle. And best of all.

I get to pretend to fix stuff for 6 whole hours. (never works afterwords)

I'm bringing some stuff. What are you guys bringing...?????????

And Aaron. Bring your car...!!!!!!! I wanna drive it with the newest iteration of your engine.

And where the hell is Elllliot???? I haven't heard squat since he moved. I miss the OLD fart.

So who's going...???????

Cheers,
Clayton

Posted by: craig downs Oct 17 2007, 12:15 AM

me

Posted by: Aaron Cox Oct 17 2007, 12:21 AM

not drivable till it gets brakes and a tie rod end smile.gif

you got the day right this time (kaptkaos install day jab)


I will be there

Posted by: craig downs Oct 17 2007, 12:27 AM

I should have your struts done tomorrow

Posted by: KaptKaos Oct 17 2007, 12:31 AM

I should be there. It will be a little later in the morning, however.

Posted by: bernbomb914 Oct 17 2007, 01:18 AM

I will have to miss it because I will be coming home from Scottsdale sunday. If I can get here early enough I will stop by

Bernie

Posted by: Twystd1 Oct 17 2007, 01:29 AM

Bernie.... Are you sure your not 28 years old...??????????

And happy birthday ya nut case...... agree.gif drunk.gif

C

Posted by: highways Oct 17 2007, 05:32 AM

Me, Dan, and T H O M A S are going.

I'm bringing:
rear reflector
electric trunk selinoid
monza muffler
shift knob
rear trunk lock
one used Hella front turn lense
one Hella side marker (think it's the driver side)
one dash vent
used stock rotors (rusty) if someone pm's me that they're interested
2.0 fuel pumps needing rebuild
steel bumpers from 73'
gas tank
rear koni shocks and springs
one (maybe two) KYB front shocks
one set 73' seat belts
triangle window glass
passenger rear view mirror with small ding and broken glass (ubber cheap)
strikingly OEM simular drain tube material, new
front brakes (need rebuild)
fairly nice rear chrome bump (has one rust bubble and mild ding... but pretty unoticable for daily driver) pm me if interested since I have to remove it
other goodies I can't remember
Dan is bringing multiple new modern headlights (Hella I think) at below retail


I'm shopping for:
interior rear view mirror
5 lug fuchs
rear brakes (rebuilt)
fog light grills
fog light switch
sunvisor mount hardware
mounting clips for large rear targa trim piece (someone please bring these! I'll pay double what they're worth biggrin.gif )
tan carpet
trailing arms
passenger steel rocker panel
tweed brown floor mats
73' 2.0 heat exchangers in great shape or SS
triad muffler
heater hoses


I might run out of room in the car... so if you're interested in any of the larger items specifically- pm me so I can be sure to bring it.


I'm also bringing a professional female dancer who's going to help me get low prices from certain vendors.

Posted by: bdstone914 Oct 17 2007, 08:53 AM

Me and My son wes will be there with plenty of junk.

Posted by: KaptKaos Oct 17 2007, 09:33 AM

QUOTE(highways @ Oct 17 2007, 04:32 AM) *

Me, Dan, and T H O M A S are going.

I'm bringing:

one set 73' seat belts


I need to replace my passenger belt. PM me how much you want.

thx

Posted by: Rotary'14 Oct 17 2007, 09:44 AM

I'll be there.

Looking for;
CV circlips and washers (2 sets).
Front right hard brake line (clipped to underside of car) and fittings near master cylinder.


-Rob

Posted by: Brando Oct 17 2007, 11:54 AM

I'll be there, bringing beer and tools with me if anyone wants a hand working on their car.

Posted by: jim_hoyland Oct 17 2007, 12:19 PM

I'll be there in early am.

Posted by: dlo914 Oct 17 2007, 01:01 PM

i'll be there w/ shirts to sell smile.gif

Posted by: Twystd1 Oct 17 2007, 01:49 PM

So who the hell else is coming????

C'mon guys and girls. We gotta know how many cows to kill.

And I am bringing a sawzall and MANY blades. Just in case Slits gets a little testy. Then we will cut up his car to make him pipe down.

So where the hell is Elliot....??????????

OH... Does anyone need a complete 2.0 or a 1.7 engine? I have spares for sale if ya need em. Complete with HEs. (Unknown condition, they turn freely)

Also have tons of small parts. Just PM me if ya need em.

Clayton

Posted by: gdonahoe Oct 17 2007, 02:20 PM

Planning to show up with a pair of seats and few other odds and ends.

Gary

Posted by: Twystd1 Oct 17 2007, 03:28 PM

I am also bringing a pair of Fake Fuchs for a friend that needs em.

Anyone need any body parts...???

Clayton

Posted by: levonfarra Oct 17 2007, 05:52 PM

I'll be there. I am looking for a targa top in very good condition and 73 chrome bumpers (for a reasonable price) and maybe one very nice Fuch.

Levon

biggrin.gif

Posted by: spunone Oct 17 2007, 06:26 PM

So Sorry to miss the event of the year but I'll be up north in Oakland to watch my RAIDERS. so remember buy hi sell low happy11.gif

Posted by: Twystd1 Oct 17 2007, 06:29 PM

Can someone PLEASE bring a Playboy Bunny for me....????

I need one more to make a complete set.

Must be able to remove chrome off of early bumpers.
And understand that in a verbal debate.
Tit for Tat means something totally different.
Must have complete trim rings and proper tailshaft concentricity for old shaft install. New lube required. NOT SWEPCO...!!!!!!

Bring em if'n ya got em.

Thanks for my time.

Clayton

Posted by: gdonahoe Oct 17 2007, 06:58 PM

Sorry Clayton that part is NLS.

Posted by: Headrage Oct 17 2007, 06:59 PM

I'll be there.

Prolly around when the food is ready... chowtime.gif

Posted by: SECHSER Oct 17 2007, 07:27 PM

hi guys, this will be my first time and i'm looking forward to this. i have some left over parts from my 73:

*3 months old 17mm master cylinder (installed it before my car got wrecked)
*steering colum with new turn signal switch and good wiper switch
*front calipers
*good used steel braided brake lines
*passenger side inside door handle/ bottom cover
*911 cherry bomb exhaust (dunno what brand)
*(1970) driver side door glass and triangle glass
*horns
*brake fluid reservor
*fuse box w cover
*relay box
*glove box and cover
*ash tray
*pair of american tail lights (one is cracked)
*the weird black can for gas fume
*one side marker (pass side i think..)
*interior fan
*type 4 intake gaskets (new in empi package)
* a set of fake fuchs 2 15x7 2 15x8 nicely powder coated in black BUT!! THEY'RE NOT PORSCHE PATTERN.. not 5x130mm but mayby 5x4.75 chevy?? dunno confused24.gif
i also have some left over vw stuff.. not sure if i should bother to take them with me..
vw stuff:
*stinger w/o baffle
*weber idf intakes (to vw dp heads)
*dual carb breather box with hoses (brand new)
*early scirocco steering wheel
*200mm cluth and pressure plate (german)
*009 dizzy with rotor and cover (no guts)

i think i could manage to fit them all in my sechser. and a scheisse load of spaten optimators beerchug.gif beerchug.gif beerchug.gif




Posted by: Twystd1 Oct 17 2007, 08:00 PM

Spaten Optimators....

Have you tried Munich Okto???

Clayton

Posted by: computers4kids Oct 17 2007, 08:39 PM

I'm planning on coming...with 8 seats, most free...handful are already spoken for and a couple are worth something. Haven't decided if I want to load up a pile of parts...at least a box or two too pay for the gas down. It's hard to know what to get rid of when you have two projects in a zillion pieces. confused24.gif

Hopefully, Jim Hoyland will be busy with the burgers so I can unbolt his Getty Dash.

Does anyone have a replacement rear trunk panel by tailights?



Attached image(s)
Attached Image

Posted by: SECHSER Oct 17 2007, 08:51 PM

QUOTE(Twystd1 @ Oct 17 2007, 07:00 PM) *

Spaten Optimators....

Have you tried Munich Okto???

Clayton


munich okto? i'd love to!! i heard southern german beer is suppose to be the best (and i like BMW's too) you're gonna bring some right? beer3.gif

Posted by: Lou W Oct 17 2007, 10:06 PM

Crap....work got in the way........ I'll be heading down to So Kal on the 25th sad.gif I'm gonna miss this one.

Posted by: Elliot Cannon Oct 17 2007, 10:47 PM

I'll bring the Screaming Yellow Zonker.


Attached image(s)
Attached Image

Posted by: highways Oct 17 2007, 10:52 PM

Oh shoot, Elliots going? I'm not going anymore.






























bootyshake.gif



laugh.gif

Posted by: euro911 Oct 17 2007, 10:59 PM

QUOTE(Elliot Cannon @ Oct 17 2007, 09:47 PM) *

I'll bring the Screaming Yellow Zonker.
How much you asking for it Elliot? tongue.gif

I don't own enough 914 s#it to sell or trade anything yet, so I'm bringing an empty pick up truck & a bunch of cardboard boxes biggrin.gif

NEED (2.0L Stuff):

Misc Engine Parts:

Fairly Complete FI system/parts (Ron?)
Front & Rear Tins
Left/Front Cylinder Tin
Oil Filler Assy
Air Flap Assy
Distributor Clamp

Desire:

Headers? smile.gif

Posted by: SLITS Oct 18 2007, 12:45 AM

I won't be there sad.gif , but I hear Ron smoke.gif & Professor 914 sawzall-smiley.gif are gonna show.

Posted by: Twystd1 Oct 18 2007, 01:58 AM

Holy SHIT...

Ellyut is gunna be there... YEAH..

For those of you that don't know Elliot. This guy drives with the top off even when it's raining. And he doesn't have to.....

He lives these cars like they should be lived......

And his even run. I don't relate... at all......

So who the hell else is coming...?????

Clayton

Posted by: Brando Oct 18 2007, 04:59 AM

Slight revision... I be comin sans the beir. No monies sad.gif

Still needing an (unchopped) seat and a pair of heater flapper boxes.

Bringing my tools. Maybe someone needs some work done in exchange for parts??

~Brando (might as well be a beggar)

Posted by: ahdoman Oct 18 2007, 08:12 AM

I'm trying to rally the Santa Clarita contingent. If I get 'em all it's me, Rick (2-Oh), AndyS, Dave & Mike D. I'll be bringing a couple of misc. parts;
- Anza (?) exhaust Slits gave me to try (no fit, thanks anyway Ron)
- Black driving light grills
- Silver painted blank out driving light grills
- Fuse Panel (sorry, no cover)
- 050 rotor & cap (new)
- 009 distributor
- fake (EBay type) Pertronix unit (new)
- 2 "bullet" style mirrors
- 1.8 / 1.7 OEM plug wire set (new)
- Misc. Seat belt parts
- Very nice LE style valance (aftermarket glass)

What I need is...
- Clean 2.0 H.E.'s or stainless
- Banana muffler for 2.0
- No tits front chrome bumper

Posted by: rmital Oct 18 2007, 12:42 PM

...going to make one of these meets...hopefully the next. As long as Glenn offers up some space for me to crash for the night. (and if I could find a cheap flight)

~post some pics afterwards so I know what to expect!

Posted by: TonyAKAVW Oct 18 2007, 01:39 PM

I'll be there. I will be selling a bunch of random parts, including an early style sharp-corner chrome bumper

-Tony

Posted by: So.Cal.914 Oct 18 2007, 01:57 PM

Slipped in to say I will not be there, still in NJ. dry.gif sad.gif 70's here today, walked in

a grassy medow...barefoot. I hear this is uncommon for here, this time of year.

I know you are disappointed Ron(yeah right), but it can't be helped. Uncle still sick.

You all have a good time, and Ron, give Toastie a BIG hug and kiss for me. smile.gif

Posted by: highways Oct 18 2007, 11:42 PM

I've got a modern Blauplunkt Cd player I'm bringing too.

Posted by: euro911 Oct 19 2007, 12:26 AM

QUOTE(highways @ Oct 18 2007, 10:42 PM) *

I've got a modern Blauplunkt Cd player I'm bringing too.

PM sent ...

Posted by: Twystd1 Oct 19 2007, 01:15 AM

Hmmmm. Anyone need a side shift trans...????????

I think it is good. But I don't really remember. So it's a core trans. Cheap

C

Posted by: Brando Oct 19 2007, 04:18 AM

I got 2 amps and a pair of (supposedly) high-end speakers i'll let go for cheap -- will bring them with.

Got a good PP and Clutch I may shill out cheap as well.

Posted by: SLITS Oct 19 2007, 08:12 AM

QUOTE(Twystd1 @ Oct 19 2007, 12:15 AM) *

Hmmmm. Anyone need a side shift trans...????????

I think it is good. But I don't really remember. So it's a core trans. Cheap

C


Hmmmmm .... I'll take it as BJ needs one .... now remember, your definition of cheap and my definition of cheap may be worlds' apart biggrin.gif

Posted by: computers4kids Oct 19 2007, 08:57 AM

I have a sideshifter that I recently shipped to Texas and FedEx broke a mounting ear...so they shipped it backed to me. This transmission will meet everyone's defintion of "cheap."

Things I question whether to bring or not?
Does anyone need a set of 72 rotors...possibly to drill for a 5 lug?
1.8 core engine...I think it dropped a valve...?
Rear windows?
Dash frame with attached cracked dash?
targa top?
75 front and rear bumpers?




Posted by: 2-OH! Oct 19 2007, 10:41 AM

For those of us that are directionally and L.A. freeway challanged, along with sometimers disease (sometimes I can remember and sometimes I can't)...Would it be a good idea to post the wherebouts of this little suware'...Maybe even directions...

2-OH!

Posted by: George H. Oct 19 2007, 12:35 PM

QUOTE(2-OH! @ Oct 19 2007, 09:41 AM) *

For those of us that are directionally and L.A. freeway challanged, along with sometimers disease (sometimes I can remember and sometimes I can't)...Would it be a good idea to post the wherebouts of this little suware'...Maybe even directions...

2-OH!



http://z8.invisionfree.com/ClubNARP/index.php?showtopic=2588

driving.gif chowtime.gif beer3.gif poke.gif driving.gif


Attached image(s)
Attached Image

Posted by: 2-OH! Oct 19 2007, 01:29 PM

Sorry guys, but my password and sign in don't work at NARP anymore...Dunnno why, they just don't...Password retrieval doesn't help either...

2-OH!

Posted by: George H. Oct 19 2007, 01:44 PM

QUOTE(2-OH! @ Oct 19 2007, 12:29 PM) *

Sorry guys, but my password and sign in don't work at NARP anymore...Dunnno why, they just don't...Password retrieval doesn't help either...

2-OH!


QUOTE


From Slits


Ah yes, it is that time of year again ..... temperatures drop, sun goes away and babies are created. So, in light of that, this is the first official announcement of the

G & R ALL 914 RUSTY PARTS SWAP MEET AND ANIMAL FLESH RAOSTING FESTIVAL - OCTOBER 21, 2007

It will again be held in beautiful, smog free, almost uptown Riverside, CA. Oxygen and SCBA appartus are optional.

Rules are the same as all the rest of them. Anyone violating the rules will be violated.

Bee here or bee square (there's your bee joke Rubberboy).

Further information as soon as I feel like posting again .... I'm trying to withdraw.

Se habla espanol ....

The Premire Event of The Year ..... The G & R All 914 Rusty Parts Swap Meet and Animal Flesh Roasting Festival. It has been decided that the date shall be:

SUNDAY, October 21, 2007

As always, gates will open at 6:30 AM. Flesh Roasting to begin somewhere around 10 AM. We ask for a $5.00 donation to help pay for the food/drinks and the drugs we need to calm us down.

Directions as promised:

The property is located basically at the intersection of the 60 Frwy and the 215/91 Frwys in Riverside. Due to the construction of a new mixmaster to handle the traffic to Moron Valley....you have to kinda work the off ramps..

If you are coming from Westlake Village and all points North and East somewhat)....find your way to the 60 Frwy eastbound.....For those of you that will use the 210 or 10...go south on the 15 to the 60. As you approach Riverside and before the 91/215 intersection, get off at Main Street and turn right. Go to the first signal (Spruce) and turn left. Go 3 stop signs, cross the RR tracks and you will see a small sign "Kansas Ave". Due to the construction, Kansas is closed at the RR and you need to go around a building to get to it. Make a right at the sign...make a right at the next stop sign....make a left at the next stop sign.....immediately to your right is the front gate of The Recycler Core Company...it will be closed...continue until you see an opening in the fence...that's the back gate....and that's where you want to be.....Remember. if your car is low to cross the gate track on the far left.

From Vegas.....down the 215...past the 10.....to the 60 Westbound....get off on Main street (1st exit real close). At top of ramp (stop sign) turn left....go to second stop sign (Spruce) and turn left....the rest of the directions are above.

From San Diego....come up the 15 and take the 215 North split around Temecula...215 all the way to where it joins the 60 in Moron Valley....down the hill in the 60/215 past UCR....to the Blaine/3rd Street Off ramp...GET OFF....turn left at the signal and go to about the 3rd light (Kansas)....turn right...., cross a set of RR tracks and look immediately to left for open gate....

From the OC and Corona (no BFs allowed)...come up the 91....get off (the freeway) at Spruce Street (last exit prior to the 60 Frwy)...turn right....continue thru 1st signal ....across RR and look immediately right for a sign that says "Kansas Ave" .... Kansas is blocked off at Spruce and you have to go around Howard Industries to get to Kansas .... lMake a right at the sign...make a right at the next stop sign....make a left at the next stop sign.....immediately to your right is the front gate of The Recycler Core Company...it will be closed...continue until you see an opening in the fence...that's the back gate....and that's where you want to be.....Remember. if your car is low to cross the gate track on the far left.

Happy travels..........

Cell Phone for Slits & Ron .... (951) 751-3584
Cell Phone for Glenn .... (951) 203-1418
Cell Phone for Professor 914 ....(090) 0U8-12IC



Attached image(s)
Attached Image

Posted by: skline Oct 19 2007, 03:14 PM

I will be out there Claytonobitch as you already know. I have PM'd a few people who posted up things I by chance need. Hopefully I can afford them come Sunday. If anyone needs anything, I have a complete 72 car here with just about everything on it including 1.7 and tail shift trans. Let me know and I might be able to remove it and bring it with me.

See you all out there!

Posted by: sixnotfour Oct 19 2007, 03:44 PM

George, thats my poc badge pic from Samba , do you have one to sell me?

Posted by: George H. Oct 19 2007, 03:50 PM

QUOTE(sixnotfour @ Oct 19 2007, 02:44 PM) *

George, thats my poc badge pic from Samba , do you have one to sell me?


No, none for sale I want one too beerchug.gif


Attached Image

I do have one of these available laugh.gif

Posted by: drive-ability Oct 19 2007, 10:04 PM

I'll be there w00t.gif

I need

1974,

1. squeegees (2), and
the chrome / aluminum trim that holds them in (2)

3. inside and outside fuzzies (all)

4. Rear spoiler

Posted by: computers4kids Oct 19 2007, 10:22 PM

QUOTE(drive-ability @ Oct 19 2007, 09:04 PM) *

I'll be there w00t.gif

I need

1974,

1. squeegees (2), and
the chrome / aluminum trim that holds them in (2)

3. inside and outside fuzzies (all)

4. Rear spoiler


I love your car...I couldn't believe you were considering selling it a little while back, I'll be looking forward to finally seeing it in person.
Mark

Posted by: Twystd1 Oct 19 2007, 10:52 PM

Anyone need a COMPLETE 2.0??? OR a 1.7?
From Heat exchangers to Injection. It's all there.

In totally unknown condition. Ya just might get lucky.
Or I part em out on Eslay.

Lemme know. Cause they are heavy for one guy to haul around.
I will bring em if you want em.


AND:

Mark, DriveAbility's car is better than the pictures. REALLY.

He has some seriously trick, well thought out mechanicals on this car.

I really like it.....

Clayton

Posted by: drive-ability Oct 19 2007, 11:14 PM

QUOTE(Twystd1 @ Oct 19 2007, 09:52 PM) *

Anyone need a COMPLETE 2.0??? OR a 1.7?
From Heat exchangers to Injection. It's all there.

In totally unknown condition. Ya just might get lucky.
Or I part em out on Eslay.

Lemme know. Cause they are heavy for one guy to haul around.
I will bring em if you want em.


AND:

Mark, DriveAbility's car is better than the pictures. REALLY.

He has some seriously trick, well thought out mechanicals on this car.

I really like it.....

Clayton


Clayton,
I think you and your ophthalmologist need to have words.. laugh.gif
I appreciate the comment, but you can only do so much with a hammer and a grinder.. sawzall-smiley.gif


Posted by: So.Cal.914 Oct 20 2007, 07:52 AM

I have seen drive-ability's car a few times and it never gets old. Someday

hopefully I will get a ride in it and find out if it is as spooky as it looks.

Posted by: SLITS Oct 20 2007, 09:57 AM

QUOTE(2-OH! @ Oct 19 2007, 09:41 AM) *

For those of us that are directionally and L.A. freeway challanged, along with sometimers disease (sometimes I can remember and sometimes I can't)...Would it be a good idea to post the wherebouts of this little suware'...Maybe even directions...

2-OH!


2727 KANSAS AVE, RIVERSIDE, CA. 92507

Posted by: So.Cal.914 Oct 20 2007, 10:01 AM

It's easy...Just look for the crackhead gang bangers, and make a left. smile.gif

Posted by: Heeltoe914 Oct 20 2007, 10:39 AM

Well I wont be there this time I am up at Laguna Seca for the ALM Racing, OK now you guys save me some parts for the next one.

Groupe Hugs.

Posted by: Toast Oct 20 2007, 11:08 AM

I will try to be there for coffee duty and to part my yellow 914 so all you lost boys can find the place.

Don't need nuttin and I don't have nuttin for sale.

Posted by: skline Oct 20 2007, 05:24 PM

QUOTE(Toast @ Oct 20 2007, 09:08 AM) *

I will try to be there for coffee duty and to part my yellow 914 so all you lost boys can find the place.

Don't need nuttin and I don't have nuttin for sale.



If you have nothing for sale, why are you parting your 914?
Or did you mistype and mean to say Park? confused24.gif

Posted by: euro911 Oct 20 2007, 07:51 PM

Yeah ... should we be keeping an eye out for small parts along the roadway or large chunks of sheeeeet-metal hanging from telephone wires confused24.gif

biggrin.gif

Posted by: Twystd1 Oct 20 2007, 08:39 PM

I just loaded the truck.

And I am bringing a REAL complete 911 steel dash for those of you that want to do a real 5 gauge conversion in steel.

A front end. Some small parts, a pair of stripped HE's. Now they look like headers...!!!!!

Aaron's blow up doll. (slightly used and very greasy)

4 to 5 lug adapters. (One pair)

3 stock sized Fake Fuchs. In nice shape.

One Steel wheel.

And my small tool box to work on cars. Timing light etc.

Clayton

Posted by: skline Oct 20 2007, 08:58 PM

I too am loaded up and ready to go, I think. If anyone needs anything, let me know and if I have it I will bring it with me. So far off the top of my head I have the two rear control arms, rear brakes complete, front control arms with sway bar tabs and torsion bars, an interior rear view mirror, heat exchange warm air guide plate, several relay boards and some other misc stuff that was in my garage. My truck is not a large truck and the lid keeps me from piling it on. But I still have some room so if you need something, let me know tonight, I will be rolling out of here around 6:30 AM.

See you all tomorrow.


Posted by: computers4kids Oct 20 2007, 09:40 PM

truck is loaded...leaving around 4:30AM...yuk!

Six seat cores
box of seat rails
two rear windows
4 door panels
front & rear 75 bumpers...I know, don't get excited
914 front end suspension less calipers for a 72
3 relay boards
2 fuel pumps (both types)
Djet injection
stub axle
rocker panels
steering column
shift rods
targa top
sideshifter with broken ear
4 head light motors
2 head light assemblies
2 head light lids
pedal board
steel braided brake lines
2 alternators
1 starter
box of heat exchanger tin
rear tailight lenses and housings
73 dash frame and cracked dash
variety of latches
2 air cleaners
new pushrod tubes
boxes of misc stuff

Posted by: brer Oct 20 2007, 09:42 PM

I was going to go,

but the last race of F1 suduced me away.

sorry.

Posted by: skline Oct 20 2007, 11:07 PM

I am off to the store to pick up some beverages for tomorrow in the ice chest and then hitting the sack early for tomorrow. Just waiting for Clatonobitch to show up and pick up some parts he wants to take with him. Worst case is he just comes by and gets them and misses the opportunity to say hi to me in person. smile.gif His loss......... biggrin.gif

Posted by: Twystd1 Oct 20 2007, 11:17 PM

My loss??????

WTF are you thinking... it would be your loss to see my adonis good looks, my attentive and brilliant humor... And my farts. cause I had Chili tonight...

I am on my way now... Thanks for reminding me Scott "O" rama.

C

Posted by: Slider Oct 21 2007, 12:58 AM

I should be there with my son and my 72. looking for a couple things but not sure how much $ im gonna have. if anybody thats there and can help me figure out why my idle is so high on my Djet 1.7 i would be in debt.. i tried to get my bro Tuna to join me but hes got something going on.

It would be cool to meet everyone and see some i havent seen in awhile.. Aaron, Clayton, Toast .

If anyone wants to trade a decent top for one that has a glass sunroof.. let me know.. and Yes someone put a glass sunroof on a targa top..and no it wasnt me.. a PO did it..

Im looking for a good 72 e brakes. front and rear valances good cig lighter .. maybe a ts housing drivers side..

Ohh well im prob too late everyones asleep counting 914s ..

ohh man after that.. maybe i should goto bed..

Chris

Posted by: Twystd1 Oct 21 2007, 01:08 AM

See ya there Chris...

Clayton

Posted by: Brando Oct 21 2007, 01:59 AM

3 more hours to go until sleep.

See everyone there around... 10? 11? Sheeeeeit, what time should I wake up?

Posted by: siverson Oct 21 2007, 10:27 AM

Leaving now... It's as early as I could get up.

Posted by: Aaron Cox Oct 21 2007, 10:31 AM

ill be there areound 11 for lunch smile.gif

Posted by: Gint Oct 21 2007, 01:34 PM

thisthreadisworthlesswithoutpics.gif

Posted by: skline Oct 21 2007, 06:04 PM

QUOTE(Gint @ Oct 21 2007, 11:34 AM) *

thisthreadisworthlesswithoutpics.gif



Well then you should have come out and taken some!!! I had my camera but it was so windy, I did not take a single one due to the dust factor that was going on. It was fun though. Lots of good deals on parts.

Posted by: Brando Oct 21 2007, 08:21 PM

Thanks everyone for a great time -- it was wonderful to meet a lot of you and see so many familiar faces at the same time.

THANK YOU AGAIN CLAYTONNOVICH for all your help. Dizzy will be fine-tuned tomorrow. Yer the man. And most definitely Greg Robbins for the swap!

Posted by: Slider Oct 21 2007, 09:17 PM

Check out the pics post for all of the pics from the swapmeet.
http://www.914world.com/bbs2/index.php?showtopic=77418

I had a blast and wanted to thank everyone and the kid is still talking about it and wanting to look at the pictures..

Chris

Posted by: computers4kids Oct 21 2007, 10:23 PM

Left at 3:30 AM and didn't get home till 6PM...a lot of driving for one day, but well worth it. I really enjoyed seeing many of you again. My wife was glad to see that my pickup was much emptier than I started with.

Big Thanks...to Ron & Glen for all your hospitality and work to put on such a event! ...today was a lot of fun!

There were a lot of 914s today...it sure is nice seeing how eveyone puts thier own flair on these cars. I would of been happy to drive many of them home.
I finally got to see "drivabity's 914" in person...holy crap, that car is an excellent conversion. I could get in real trouble with a car like that.

Aaron...shouldn't you be studying... av-943.gif good to see you again!

Posted by: euro911 Oct 21 2007, 10:46 PM

Yes indeedy ... many thanks to Glenn & Ron for the hospitality beerchug.gif (and some great deals too) biggrin.gif


Posted by: Elliot Cannon Oct 21 2007, 10:55 PM

Thanks to G and R for another great event. Always good to see old friends and make new ones. The burgers were good also.

I drove home to Paso Robles on the 101. I wanted to stay as far away from the wind as possible. The smoke from the brush fires was awful. The smoke obscured the sky from Mullholland to just north of Ventura. It looked like LA County was on fire. What a mess.
Cheers, Elliot

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)