Hi ya'll . I'm doing another transaxle, this one will have all new parts in it. it will even have a new 1st gear slider. have you ever seen a NEW first gear slider with virgin dog teeth? well, this is my first too. It's so perdy I might have to post some pics.
i do need to borrow a dog tooth puller. I hope someone here reads this that has one I could use for a few days and return it fed ex or something like that.
I just use pliers myself. Of course you need a friend to hold the dog and someone usually gets bit...
I know, don't quit the day job...
I think I might have what you need at the shop, if not I know someone who does. I'll try to get a hold of him today. If you guys are still planning on coming up on Saturday we could do it here at the shop.
BTW- You wouldn't have any drive axles or decent CV assemblies would you? That was what broke at Streets, the trans is fine!
Check your PMs
Throw a piece of meat in the air and then do a Bruce Lee round house kick precisley hitting the tooth in questions and it should pop right out
Ask me how I know...
Woof!
puller?...please!
Did you try your local FLAPS... they usually have tools to rent. Should be able to come up with something.
Ever since I started using the choke chain, the dog stopped pulling me. Now he just gasps for breath.
PLACE THE CHOKE CHOKE CHAIN JUST UNDER THE EARS, high on the neck. when placed on this most tender spot of the neck, he will learn more quickly and gasping, pulling and such will all go away.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)