Sorry to be so far off the 914 topic, but didn't know who else to ask . . .
I'm trying to swap a set of sport seats from a 1990 Audi V8 into my 1986 5000 CS quattro. Mountings are interchangeable, but wiring connectors are different ('86 uses a 9 pin connector, '90 uses a 6 pin connector). I've got a pretty good diagram for the 86, but need some info for the 90 to make a "jumper."
Any help would be greatly appreciated!
Best regards--and HAPPY THANKSGIVING!
Attached image(s)
Maybe. Ask me tomorrow at my e-mail address:
john@westcoastgarage.net
V8 stuff is apt to be different from anything else. I have a V8 manual, and one that covers the 91 200TQ.
The Cap'n
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)