Anyone have first hand experience with the db level of phase nines? Infineon recently instituted a 103 db level with one warning....I have a sub 100 db setup using a 911 banana that I use at Laguna Seca...but I'm hoping to get to play at Infineon with my new exhaust set-up...
Bill P.
Check out: http://Http://www.victorylane.com/old/Feb98_Noise.html
Then check:
http://www.quiethorsepower.com/quiet_exhaust.html
Then call and talk to Pete Weber at Quiet Horsepower.
Then pray for no rain on 2/14-15
Ken
Thanks Ken,
I'll check it out.....and yep...I don't want rain....praying already...
Bill P.
A single Phase 9 on a 4 cylinder will bring sound levels down to less than 95dB. I don't have data on six cyl. applications, but I think you will have no problem.
Chris - Pete said you may noise numbers on the Phase 10 on 4 cyl 2.0.
Do you ?? - and if so is it mounted at the output of the header combiner box (4:1) or is there a length of pipe between the box and the Phase 10??
Ken
I am sorry thought you knew. Pete Weber said you were making them. It is the muffler that look like a large coffee can on its side with the "in" at one end, and the "out" 180 degrees rotated at the other end.
May be I have you mixed up with sombody else.
Ken
The only sound data I have for these is in a 4-2-1 system that includes a Phase 9 with the Quiet Can attached in series.
Sound readings are typically below 90dB at the track with this setup.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)