Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 911 Exhaust nuts

Posted by: 914Sixer Nov 30 2007, 01:42 PM

I was playing around yesterday and I had left over 6 nuts so I though I would try them. I bolted the exhaust up to my heads with no problems. They are the same size as the stock (expensive) nuts and twice as beefy. Has anybody else used these on a running motor?

Attached image(s)

Posted by: 904svo Nov 30 2007, 03:05 PM

They should work as long as you can tighten them.

Posted by: Cap'n Krusty Nov 30 2007, 03:18 PM

Those look suspiciously like 911 cam tower nuts,as they're awfully narrow to be exhaust nuts (which are 15mm O.D., wider than the 13 mm wrench size nuts that are supposed to go on there). Probably about as wide as the flange on the stock 2.0 exhaust nut, though. No reason why they won't work, "IF" the stud isn't too long, preventing the Allen key from being able to fully tighten the nut.

The Cap'n