Hey all. So here is my lack of SMRTS.. I'm working without my trusty haynes or my how to rebuilt a type 4 and of course, I'm stuck. On the union of the 4cyl to the trans, there are 4 studs. I have the bottom two but apparently not the top two.
Are they all the same size?
Does anyone have a manual handy to tell me what size, thread, etc they are so I can attempt to locate one?
Thanks all
-- Steve
Bottom two are studs. Top two are through bolts. The bolts are M10 x 1.50. The one that goes through the starter is 115mm long, the one on the other side is 85mm long. Thanks PET!
Thanks McMark! I appreciate the quick answer.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)