Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ rear 914/6 stubs

Posted by: 1973914 Jan 8 2004, 09:38 AM

do the stub axles from mittlemotor work with early 911 hubs? I have the rear hubs and would like to use them with the right stub axles. This would allow me to use the stock axles, right? I dont have early stock 914 rear hubs to stud, which would be the other option.

Posted by: campbellcj Jan 8 2004, 11:12 AM

Yes

Posted by: davep Jan 8 2004, 11:13 AM

914/6 stub axles work with 914/6 hubs, and they ARE the early 911 hub.. That is exactly what I used when I did the conversion. Not too sure what years work, but I recall the 1974 911 hub was a little different. Bearings were the same up to 73, and changed in 74.

DaveP

Posted by: 1973914 Jan 8 2004, 12:59 PM

thats great guys, thanks very much. How hard is it find the early hubs to drill?

Posted by: East coaster Jan 8 2004, 01:35 PM

Be careful about the statement that they work with "early hubs". I bought a set of quote "early hubs" and they will not work. You need hubs from post '69 911, I think '69 thru '73. Earlier than '69 has a very course spline and will not work. Brad or someone can probably give you a more definitive answer, but the real early hubs will not work.

Posted by: 1973914 Jan 9 2004, 01:15 PM

thats cool they are from a 72!

Thanks

Posted by: otto Jan 9 2004, 02:49 PM

No need to get them from germany we have them right here in Venice beach. Early Hub shown with our 914-6 Stub axle made by Aerospace Machine Shop for us.Otto

http://www.ottosvenice.com/

Attached image(s)

Posted by: steve@ottosvenice.com Jan 9 2004, 07:04 PM

The stubbs are Made from a Super duty M 30 Alloy they are $245 each Here are the ones Sven's selling At 1 euros to 1.28 dollars they are $ 242 + shipping and customs fees. Steve

Attached image(s)