Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Wheel Styles

Posted by: 749142 Feb 1 2008, 10:56 PM

i want to change wheels styles and i want to know how many styles are there. and i want to see some of the other members wheels to help me decide. 4 or 5 lug it doesnt matter. i just want to see how many different styles there are. idea.gif
steven

Posted by: Lou W Feb 1 2008, 11:02 PM

Superlites, 15 x 6. stock porsche pattern. smile.gif


Attached image(s)
Attached Image Attached Image Attached Image

Posted by: 749142 Feb 1 2008, 11:05 PM

QUOTE(Lou W @ Feb 1 2008, 09:02 PM) *

Superlites

Thanks Lou. what size bolt pattern are those? those are nice and wut size? 15x6 or ?
steve

Posted by: type47fan Feb 1 2008, 11:11 PM

. . . 16 X 6 FUCHS . . .

. . . genuine EMPI 8 spoke . . .


Attached image(s)
Attached Image Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:22 PM

8 spoke empi style...


Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:24 PM

fuchs


Attached image(s)
Attached Image

Posted by: Lou W Feb 1 2008, 11:26 PM

Dan, that sure is a good looking car. shades.gif

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:26 PM

or 7" steelies biggrin.gif


Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:27 PM

better look

these were a bit rusted and neglected when I got them...I just did a quicky paint job with some rattle can gloss black for centers and gloss grey for the rims.

they will be bead blasted and repainted in a factory finish silver and then clear coated. That job will start next week once I get the old race rubber off of them. biggrin.gif




Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:30 PM

close up of black spoke empi looks

and thank you Lou. smile.gif


Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:34 PM

close up of Fuchs

these were pretty bad when I got them....spent about 5 hours hand finishing and polishing....came out fairly decent.... biggrin.gif


Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 1 2008, 11:44 PM

or you could go 5 lug and do 6 and 7" painted and polished Fuchs

these were my street wheels and tires for my 6


Attached image(s)
Attached Image

Posted by: David_S Feb 1 2008, 11:44 PM

Mahles on the primered car and Rivieras on the orange car


Attached image(s)
Attached Image Attached Image

Posted by: 749142 Feb 1 2008, 11:52 PM

QUOTE(David_S @ Feb 1 2008, 09:44 PM) *

Mahles on the primered car and Rivieras on the orange car

i like the rims note. i also like how the 916 front end is seemless. how did u do it?
steve

Posted by: Dr Evil Feb 2 2008, 12:05 AM

smile.gif


Attached image(s)
Attached Image

Posted by: sixnotfour Feb 2 2008, 12:11 AM

shades.gif


Attached image(s)
Attached Image

Posted by: 749142 Feb 2 2008, 01:01 AM

QUOTE(Dr Evil @ Feb 1 2008, 10:05 PM) *

smile.gif

hey mike. did u use wheel adapters or did u convert to 5 lug rotors?
steve

Posted by: Dr Evil Feb 2 2008, 01:19 AM

Nope, there is a specific year of 944 that has the perfect offset. They are 24mm and 15mm IIRC. I can recheck. I am running 17X7 with 225/45 in front and 17x9.5 rear with 255/45. I didnt want to use adapters. I have 5 lug conversion parts and a 911 front. I have 2 sets of drilled rear rotors if anyone is interested ($100 ea + ship).

Posted by: Gustl Feb 2 2008, 01:31 AM

very rare Hegglin 5.5x15


Attached image(s)
Attached Image

Posted by: Gustl Feb 2 2008, 01:33 AM

Campagnola 5.5x15



Attached image(s)
Attached Image

Posted by: Gustl Feb 2 2008, 01:35 AM

phone dialers 6x15 or 7x15 or various 16"


Attached thumbnail(s)
Attached Image

Posted by: Gustl Feb 2 2008, 01:38 AM

BBS 9x15


Attached image(s)
Attached Image

Posted by: Gustl Feb 2 2008, 01:41 AM

f.p.s. - don't know the exact size


Attached image(s)
Attached Image

Posted by: Dr. Roger Feb 2 2008, 02:16 AM

Porsche / BBS 295-30-ZR18's w/ Hollow Spoke Turbo Twisties on the rear.

IPB Image


Attached thumbnail(s)
Attached Image

Posted by: East coaster Feb 2 2008, 08:16 AM

2003 911 wheels ->

Attached Image

Posted by: jim912928 Feb 2 2008, 11:11 AM

Boxster 16X7's front and back (with no spacers)



Attached thumbnail(s)
Attached Image

Posted by: Sleepin Feb 2 2008, 12:37 PM

A really good spot to look at different wheel types here:

http://www.runtrod.com/gallery/v/wheels/wheels4/?g2_page=1

Posted by: David_S Feb 2 2008, 02:13 PM

QUOTE(749142 @ Feb 1 2008, 11:52 PM) *

QUOTE(David_S @ Feb 1 2008, 09:44 PM) *

Mahles on the primered car and Rivieras on the orange car

i like the rims note. i also like how the 916 front end is seemless. how did u do it?
steve

I welded brackets to the body and then pop riveted the front and rear bumpers to the brackets. The rear bumper is also seamless. Then, LOTS of fiberglass work !!


Attached image(s)
Attached Image

Posted by: JPB Feb 2 2008, 02:39 PM

Steel and westerns beer.gif


Attached image(s)
Attached Image Attached Image

Posted by: 749142 Feb 2 2008, 03:42 PM

QUOTE(JPB @ Feb 2 2008, 12:39 PM) *

Steel and westerns beer.gif

hey jpb
im actually running on westerns. i dont have pics of my car just my dads. mine is yellow and looks similar to urs. i want to convert to 5 lug and 17x7
anybody got good pics of rims that are 17x7, and the 911 5 lug pattern?

Posted by: marks914 Feb 2 2008, 04:13 PM

Boxter S alloys
Mark

http://rides.webshots.com/photo/2417293290057582025DjuFcX

http://rides.webshots.com/photo/2382821200057582025ATzWfk

http://rides.webshots.com/photo/2041932740057582025kkwWZZ

http://rides.webshots.com/photo/2525888240057582025ZOdPUv

Posted by: burton73 Feb 2 2008, 04:27 PM

3-piece BBS 7” Super light wheels 15” rear lip rolled. They need a special stem to fill with air.

Bob





Attached image(s)
Attached Image

Posted by: 749142 Feb 2 2008, 04:53 PM

QUOTE(Dr Evil @ Feb 1 2008, 11:19 PM) *

Nope, there is a specific year of 944 that has the perfect offset. They are 24mm and 15mm IIRC. I can recheck. I am running 17X7 with 225/45 in front and 17x9.5 rear with 255/45. I didnt want to use adapters. I have 5 lug conversion parts and a 911 front. I have 2 sets of drilled rear rotors if anyone is interested ($100 ea + ship).

hey mike do u get any fender rubbing with 9.5s in the back with stock fenders?
steven

Posted by: pete-stevers Feb 2 2008, 05:10 PM

here is a few


Attached image(s)
Attached Image Attached Image Attached Image

Posted by: pete-stevers Feb 2 2008, 05:30 PM

or my favorite


Attached image(s)
Attached Image

Posted by: Ray Warren Feb 2 2008, 05:46 PM

ATS
Attached Image

Posted by: drg1952 Feb 2 2008, 10:35 PM

15 x 5.5 Centerlines, which are now for sale since being replaced with Fuchs replicas

Attached Image

Posted by: stateofidleness Feb 2 2008, 10:40 PM

15x8" fuch reps
Attached Image

and East Coaster, new wallpaper thx smile.gif

Posted by: 749142 Feb 2 2008, 10:49 PM

QUOTE(stateofidleness @ Feb 2 2008, 08:40 PM) *

15x8" fuch reps
Attached Image

and East Coaster, new wallpaper thx smile.gif

u disgust me with ur slant nose. barf.gif
sorry but WTF.gif . oh well as long as ur happy with it

Posted by: stateofidleness Feb 2 2008, 11:42 PM

everyone knows slantnoses are faster

Posted by: 749142 Feb 3 2008, 12:37 AM

QUOTE(stateofidleness @ Feb 2 2008, 09:42 PM) *

everyone knows slantnoses are faster

maybe so but it doesnt look as well. besides put a little more power in a regular 914 and u wont have to convert to slantnose.
steven

Posted by: stateofidleness Feb 3 2008, 12:43 AM

i like the chalon look so... to each his own... opinions are like assholes wink.gif
i could argue that your car looks like everyone elses here smile.gif

Posted by: 749142 Feb 3 2008, 12:47 AM

QUOTE(stateofidleness @ Feb 2 2008, 10:43 PM) *

i like the chalon look so... to each his own... opinions are like assholes wink.gif
i could argue that your car looks like everyone elses here smile.gif

true but as long as we all like how we have personalized are 914s. i personally like the 916 look. i dont like the idea of cutting up the front end like they do with those chalon kits. but as long as we like wut we have and can defend y we did it its cool.

steven

Posted by: Marv's3.6six Feb 3 2008, 11:47 AM

NLA HRE 311 8X17 front 9X17 rear no spacers.


Attached thumbnail(s)
Attached Image

Posted by: Phoenix 914-6GT Feb 3 2008, 12:42 PM

QUOTE(stateofidleness @ Feb 2 2008, 10:43 PM) *

i like the chalon look so... to each his own... opinions are like assholes wink.gif
i could argue that your car looks like everyone elses here smile.gif


Some have very strong feeling against the chalon kit too biggrin.gif
Just be happy that most of them keep their opinions to themselves.

Posted by: stateofidleness Feb 3 2008, 12:58 PM

yea i know....
so when people DO lend their expertise and time to help me out, i appreciate it that much more smile.gif

i own a "normal" one too so i can fit in here lol

Posted by: Phoenix 914-6GT Feb 3 2008, 01:04 PM

QUOTE(stateofidleness @ Feb 3 2008, 10:58 AM) *

yea i know....
so when people DO lend their expertise and time to help me out, i appreciate it that much more smile.gif

i own a "normal" one too so i can fit in here lol

av-943.gif
We don't mind even if you don't have a normal one. At least I don't. Your green 914 looks very nice though. It was a good find beerchug.gif

Posted by: Gint Feb 3 2008, 02:24 PM

Anywho... back to wheels.

http://www.914world.com/bbs2/index.php?showtopic=69869&

Attached Image

Posted by: 749142 Feb 3 2008, 06:29 PM

QUOTE(Gint @ Feb 3 2008, 12:24 PM) *

Anywho... back to wheels.

http://www.914world.com/bbs2/index.php?showtopic=69869&

Attached Image

Very nice.

Posted by: 749142 Feb 3 2008, 06:34 PM

QUOTE(stateofidleness @ Feb 2 2008, 10:43 PM) *

i like the chalon look so... to each his own... opinions are like assholes wink.gif
i could argue that your car looks like everyone elses here smile.gif

hey stateofidleness. sorry if i offended u with my remark about ur slant nose conversion. besides its still a 914. i wouldnt do that to my car tho. i like the factory body with flares. but as long as we like are mods on our 914s. again sorry for being an ass burro.gif
steven

Posted by: southernmost914 Feb 3 2008, 06:59 PM

Panasport 6x15
Attached Image

Posted by: 749142 Feb 3 2008, 07:56 PM

QUOTE(southernmost914 @ Feb 3 2008, 04:59 PM) *

Panasport 6x15
Attached Image

looks like empis.

Posted by: Gint Feb 3 2008, 10:45 PM

QUOTE(749142 @ Feb 3 2008, 06:56 PM) *
looks like empis.

Except they're not.

Posted by: Dan (Almaden Valley) Feb 3 2008, 10:54 PM

QUOTE(749142 @ Feb 3 2008, 05:56 PM) *

QUOTE(southernmost914 @ Feb 3 2008, 04:59 PM) *

Panasport 6x15
Attached Image

looks like empis.

close but not quite.....Panasports and the newer wheels like Gint have are very similar....and Panasports are a very close clone of Minilites.

These wheels look like the original Empis from the 70s


Attached image(s)
Attached Image

Posted by: Dan (Almaden Valley) Feb 3 2008, 11:06 PM

real English made minilite from the 70s


Attached image(s)
Attached Image

Posted by: sixnotfour Feb 3 2008, 11:12 PM

CSI minilte knock off. aluminum


Attached image(s)
Attached Image

Posted by: Lou W Feb 3 2008, 11:18 PM

QUOTE(southernmost914 @ Feb 3 2008, 06:59 PM) *

Panasport 6x15
Attached Image



Lets see some pictures of your car please. smile.gif

Posted by: orange914 Feb 3 2008, 11:56 PM

QUOTE(Dr Evil @ Feb 1 2008, 11:19 PM) *

Nope, there is a specific year of 944 that has the perfect offset. They are 24mm and 15mm IIRC. I can recheck. I am running 17X7 with 225/45 in front and 17x9.5 rear with 255/45. I didnt want to use adapters. I have 5 lug conversion parts and a 911 front. I have 2 sets of drilled rear rotors if anyone is interested ($100 ea + ship).


wow, i've never wanted to go to 5 bolt becouse it always seemed that youd have to flare with those chubbies... guess not 9.5 on the rear? did you have to pull the fenders much, it looks minimal.

the rotors must for 5 bolt, right?

mike

Posted by: Dr Evil Feb 4 2008, 08:26 AM

I have about 2-2.5" of flare blended in to the car smile.gif Rotors are drilled 4 lug to 5, but you can use /6 if you want.

Posted by: jaybird840 Feb 4 2008, 09:22 AM

FWIW, 18x8.5 and 18x10 ATP 2pc. 285/30 in rear and 225/40 up front. Flares are standard width 7" and 9". Eric Shea rear trailing arms/hubs and 911 front end.
Attached Image

Posted by: Root_Werks Feb 4 2008, 09:34 AM

QUOTE(Marv's3.6six @ Feb 3 2008, 09:47 AM) *

NLA HRE 311 8X17 front 9X17 rear no spacers.



Marv, very cool picture of your car. I love Fuchs made into BBS 3 piece rims. You can space them with the halves. I have 8's on the front with a factory scrub radious. Pretty cool, not cheap, but cool.


Attached image(s)
Attached Image

Posted by: 749142 Feb 4 2008, 06:50 PM

QUOTE(Root_Werks @ Feb 4 2008, 07:34 AM) *

QUOTE(Marv's3.6six @ Feb 3 2008, 09:47 AM) *

NLA HRE 311 8X17 front 9X17 rear no spacers.



Marv, very cool picture of your car. I love Fuchs made into BBS 3 piece rims. You can space them with the halves. I have 8's on the front with a factory scrub radious. Pretty cool, not cheap, but cool.

that is one mean looking 914. ot, wut spoiler is that in the back?
steven

Posted by: Phoenix 914-6GT Feb 4 2008, 07:09 PM

It's just a duck tail. You can get them at most places that make fiberglass stuff for 914s.

Posted by: 749142 Feb 4 2008, 08:00 PM

QUOTE(Phoenix 914-6GT @ Feb 4 2008, 05:09 PM) *

It's just a duck tail. You can get them at most places that make fiberglass stuff for 914s.

thats wut i thought thanks

Posted by: Slider Feb 4 2008, 11:34 PM

How do they fit? any massaging of the fenders? i like how they look


QUOTE(jim912928 @ Feb 2 2008, 10:11 AM) *

Boxster 16X7's front and back (with no spacers)


Posted by: Festive_Zombie Feb 7 2008, 11:32 PM

Rare (at least I think)
MOMO aftermarket 15" X 5.5

IPB Image

I have a set, currently restoring them... Don't know what I will do with them

Posted by: rusty914 Feb 8 2008, 12:24 AM

Gas Burner...my favorite. 4 lug or 5 lug

Attached Image

Posted by: JPB Feb 8 2008, 04:18 PM

QUOTE(749142 @ Feb 2 2008, 04:42 PM) *

QUOTE(JPB @ Feb 2 2008, 12:39 PM) *

Steel and westerns beer.gif

hey jpb
im actually running on westerns. i dont have pics of my car just my dads. mine is yellow and looks similar to urs. i want to convert to 5 lug and 17x7
anybody got good pics of rims that are 17x7, and the 911 5 lug pattern?



Cool! I like the way they fill the wheel wells and don't need shims to clear the BMW front callipers. The PO had oversized wheels before and the paint flaking on the rear fenders are from 225/50/15s he had on. I run 205/55/15 Gforce and they are nice and wide with no rubbing. beer.gif

Posted by: andys Feb 8 2008, 04:31 PM

Here are what the Momo's look like on the car; sorry for the poor photo.

Andys


Attached image(s)
Attached Image

Posted by: 749142 Feb 8 2008, 08:45 PM

QUOTE(andys @ Feb 8 2008, 02:31 PM) *

Here are what the Momo's look like on the car; sorry for the poor photo.

Andys

hey Andys. was that pic taken back in august-nov looks like smoke from the wild fires last year? is that so. anwyays nice car. biggrin.gif

Posted by: 749142 Feb 8 2008, 08:56 PM

ok guys finally found a pic of my car. heres the westerns that im rolling on.

Attached Image


steven

Posted by: pjhaun Feb 8 2008, 09:12 PM

Here are my Boxster rims.


Attached image(s)
Attached Image

Posted by: John Feb 8 2008, 10:06 PM

Still, I like my cookies.


Attached thumbnail(s)
Attached Image

Posted by: Root_Werks Feb 9 2008, 12:21 AM

Mmmmmmmmmmm, coookies. drooley.gif

Posted by: 749142 Feb 9 2008, 12:32 AM

[quote name='pjhaun' date='Feb 8 2008, 07:12 PM' post='995903']
Here are my Boxster rims.
[/quot
hey pjhuan
Sweet car. looks very clean and well put together. so wut do you have for an engine?

Posted by: TROJANMAN Feb 9 2008, 01:04 AM

911 Spares powder coated (and for sale) rolleyes.gif

IPB Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)