Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Dashboard layout

Posted by: flat4 Feb 6 2008, 09:08 PM

My car is converted to RHD so the dash was made up by whoever did the conversion. I don't have as many switches, etc. as other 914s and I'd like to put them back in the corresponding place on the other side of the dash.

I found a pic on another thread on this site:.
IPB Image

This shows three switch holes on the left of the wheel - lights, hazard flashers and something. There are three holes on the right - cigar lighter and something and something.

What should be in the something holes?

Thanks, Steve

Posted by: iamchappy Feb 6 2008, 09:18 PM

From left to right, Headlight, Hazard, Fog, dash mount wiper switch, lighter, rear defrost, and fasten seatbelt light above ventilation controls.

Posted by: SirAndy Feb 6 2008, 09:54 PM

QUOTE(iamchappy @ Feb 6 2008, 07:18 PM)

From left to right, Headlight, Hazard, Fog, dash mount wiper switch, lighter, rear defrost, and fasten seatbelt light above ventilation controls.

Posted by: flat4 Feb 7 2008, 04:31 AM

Thanks!

Time to drill some more holes.

Steve

Posted by: Rick_Eberle Feb 7 2008, 04:42 AM

Hey Steve, where in Australia are you? I'm in Geelong, but I work in Melbourne.

Posted by: flat4 Feb 7 2008, 06:57 AM

QUOTE(Rick_Eberle @ Feb 7 2008, 02:42 AM)

Hey Steve, where in Australia are you? I'm in Geelong, but I work in Melbourne.

Hi Rick, Always good to find another Australian. I'm in Brisbane.

Cheers, Steve