does anyone know what a stock flywheel weighs on a original 914/6 engine, and what did the 2.0 911 engines flywheel weigh?
No prizes .... No answers
Have two but never weighed them. Sorry
Not sure. My guess 17 to 20 lbs.
I think stock is pretty light. probably 14-ish as just the flywheel seperate.
they do have holes drilled around the outside when stock
this one is 6 or something:
Attached thumbnail(s)
That's not a stock fly wheel.
here's the deal: I just bought a VERY used flywheel that has holes drilled in the outer edge (stock?), and it weighs about 10.5 lbs. I thought the stockers were 11 pounds, which would make sense since a couple of facing jobs and a half pound is gone. It's just kind of weird that the 6 flywheel is lighter than the 4 cyln.
there is a good chance its stock
I'd just use it if the tolerance are in spec to give it the right clutch step
this is a stock one lightened
if you ignore the windows, the round holes in the outside rim are in fact stock:
p.s. Jon... really... you don't say.
Attached thumbnail(s)
those 2 lightened versions are mine...
but here is a stock picture I just found on another site... not mine:
Attached thumbnail(s)
I thought I answered this with a link a week or two ago (maybe it was on 914club?). Google for "911 flywheel weight". As I recall, the page I found indicated a weight of 11.5 pounds for a stock flywheel.
Skip
12-13 lbs - mine - do not know if it is stock 914-6 or 911 ??
it is six bolt though.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)