Printable Version of Topic

Posted by: ! Jan 11 2004, 08:15 PM

I have a jack try that slides down the middle....looking for an air powered jack that sits in the tray and lifts in TWO positions....
...in other words has the ability to lift both sides of the car by contacting the left and right rear axles or the front struts.

Posted by: r_towle Jan 11 2004, 08:21 PM

Norco Industries
http://www.norcoind.com

I saw there distributor at the World of Wheels show this past weekend, good looking stup, solid product line...

Rich

Posted by: ! Jan 11 2004, 08:34 PM

Is this it?


Attached image(s)

Posted by: r_towle Jan 11 2004, 08:37 PM

Yup,
Fit on the duel ramp jack/lift like (I think) you have...

A mechanic friend I know (a pro) has one and he swears by it....loves the built in tool bench that the lift ramps provide while you are working...

I also saw the full height jack stands in action....they held up a 77k pound truck....on four stands...6 foot high

Cool stuff.

Rich

Posted by: ! Jan 11 2004, 08:45 PM

Thanks....sent them an email. Will see how many scheckels they need.....

Posted by: r_towle Jan 11 2004, 08:50 PM

The dist told me 250 ish...
Not bad considering what it is...

Good luck.
Rich

Posted by: Gint Jan 11 2004, 09:35 PM

$250!?! That's chump change for a pneumatic hydraulic jack. I've never seen one that cheap. That's why I don't own one - yet.

Group buy Mikey?

Posted by: ! Jan 11 2004, 10:24 PM

I'll see what they say....

Posted by: Gint Jan 11 2004, 10:29 PM

Yeah, lemme know what they say on price. Those things are normally quite pricey.

Posted by: ! Jan 11 2004, 10:36 PM

Do you have a lift or is this for ground use?

Posted by: Gint Jan 11 2004, 11:00 PM

You're such a gomer... but that's a damn nice avatar!

I've ahd a lift for 2 years. And I have TWO jack trays.


Attached image(s)

Posted by: ! Jan 11 2004, 11:42 PM

Yeah sorry I forgot....you used to have three 914s....where's the other one????

Little tight in that garage.....

Posted by: ! Jan 12 2004, 10:21 AM

Holy Sheepshit.....
>>>>>>>>>>>>>

Dear Mike,

Our current model for the rolling lift bridge is 79324D. The retail cost is $2,439.00. We sell these through our distributors. Please call 800-347-2232 or 310-639-4000, Monday thru Friday between 6:30 am and 3:00 pm, California time for your local distributor.

Thank you for your interest in Norco Lifting Equipment.

Lisa Lievense
Sales Coordinator

Posted by: Gint Jan 12 2004, 01:59 PM

Like I said, that's why I don't own one. I've never seen one cheaper than a grand.