Posted by: Porcharu Mar 4 2008, 04:21 PM
Title says it all - I need a powder coating shop near San Jose to do 4 parts.
Posted by: t collins Mar 4 2008, 04:32 PM
QUOTE(Porcharu @ Mar 4 2008, 02:21 PM)
Title says it all - I need a powder coating shop near San Jose to do 4 parts.
If you doing small pieces, you may want to consider doing it yourself. I'm happy with the results I achieved using the Harbor Freight powder coating system.
Posted by: Jeffs9146 Mar 4 2008, 04:58 PM
I know of one in Livermore and one in San Carlos, if those are close enough let me know and I will send you the information.
Posted by: ConeDodger Mar 4 2008, 05:15 PM
McMark... If they are small and you want black or you're willing to buy him the powder you want...
Posted by: toon1 Mar 4 2008, 05:47 PM
QUOTE(Porcharu @ Mar 4 2008, 02:21 PM)
Title says it all - I need a powder coating shop near San Jose to do 4 parts.
If they are small enough to fit into a house size oven, I will do them for free.
I have black, flat and gloss
Clear
chrome
and high temp SS
Keith
Posted by: neo914-6 Mar 4 2008, 06:44 PM
QUOTE(Porcharu @ Mar 4 2008, 02:21 PM)
Title says it all - I need a powder coating shop near San Jose to do 4 parts.
Hey Steve!
B R & F Spray
Home: (408) 988-7582
E-Mail: http://www.brf-spray.com/
3380 De La Cruz Blvd
Santa Clara, CA 95054
make sure you have them mask any fit surfaces...
oh and min is $60 or so, bring enough parts to cover it.
Posted by: biosurfer1 Mar 4 2008, 07:29 PM
wow, thats strange... BR&F is right next door to my companies main office, ESI:)
Posted by: neo914-6 Mar 5 2008, 09:03 AM
QUOTE(biosurfer1 @ Mar 4 2008, 05:29 PM)
wow, thats strange... BR&F is right next door to my companies main office, ESI:)
His wife runs a doll / toy shop, threw me off when I first looked for the place...
BTW, there's a cad plater down the street in the cul de sac...
Posted by: Porcharu Mar 5 2008, 11:57 AM
QUOTE(toon1 @ Mar 4 2008, 03:47 PM)
QUOTE(Porcharu @ Mar 4 2008, 02:21 PM)
Title says it all - I need a powder coating shop near San Jose to do 4 parts.
If they are small enough to fit into a house size oven, I will do them for free.
I have black, flat and gloss
Clear
chrome
and high temp SS
Keith
Thanks for the offer, this is my tubing bender and it's pretty big - it might fit into a commercial oven but no way a regular one.
Steve
Posted by: Porcharu Mar 5 2008, 11:58 AM
QUOTE(neo914-6 @ Mar 4 2008, 04:44 PM)
Hey Steve!
B R & F Spray
Home: (408) 988-7582
E-Mail: http://www.brf-spray.com/
3380 De La Cruz Blvd
Santa Clara, CA 95054
make sure you have them mask any fit surfaces...
oh and min is $60 or so, bring enough parts to cover it.
Cool - that's just a few minutes away from my office.