Posted by: Racer Chris Jan 16 2004, 12:25 AM
I couldn't justify welding the mount to the firewall after stretching the wiring harness to fit into the channel made for it. I also welded a longer tube through the double layer firewall from the cockpit side, intead of using the crush tube he supplies.
Attached image(s)
Posted by: Racer Chris Jan 16 2004, 12:26 AM
blah blah
Attached image(s)
Posted by: Brad Roberts Jan 16 2004, 12:30 AM
I weld them all in.
It only takes 4-6 inches of bead on the outsides and 2-3 inches on the insides. Sometimes (in the past) i would do both.
If you have ever seen the stock 6 mount... welding th RJ mount in is OVERKILL compared to stock..
B
Posted by: Brad Roberts Jan 16 2004, 12:31 AM
How old is that mount ?? I think RJ changed them from that style a few months back.
b
Posted by: Racer Chris Jan 16 2004, 01:03 AM
QUOTE(Brad Roberts @ Jan 16 2004, 01:31 AM)
How old is that mount ?? I think RJ changed them from that style a few months back.
b
Larryp just bought it a month or so back.
I didn't like the idea of ever having to remove the wiring harness through that hole. I'm sure it doesn't need to be welded to be strong enough.
Posted by: MJHanna Jan 16 2004, 07:47 AM
I’m telling Rich you’re not following instructions.
Posted by: Racer Chris Jan 16 2004, 08:33 AM
QUOTE(MJHanna @ Jan 16 2004, 08:47 AM)
I’m telling Rich you’re not following instructions.
I did read them though.
Posted by: MJHanna Jan 16 2004, 08:52 AM
QUOTE(Racer Chris @ Jan 16 2004, 08:33 AM)
QUOTE(MJHanna @ Jan 16 2004, 08:47 AM)
I’m telling Rich you’re not following instructions.
I did read them though.
He likes it when people call and say it doesn’t work. But you can say yeah but I READ em, but I race a 914 and we never follow anything……..