Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Fuel injection
Posted by: partwerks Apr 7 2008, 09:36 PM
If it ever comes around to it, what would be the best fuel injection to put on the 3.6 conversion?
To go from the 2.7 to the 3.6, what other items will be needed to go along with the conversion that I don't necessarily have on the 2.7? Can I use my 901 trans?
Posted by: toon1 Apr 7 2008, 10:08 PM
QUOTE(partwerks @ Apr 7 2008, 08:36 PM) 
If it ever comes around to it, what would be the best fuel injection to put on the 3.6 conversion?
To go from the 2.7 to the 3.6, what other items will be needed to go along with the conversion that I don't necessarily have on the 2.7? Can I use my 901 trans?
There is tons of info in the archives.
SDS and MS are both good systems.
SDS is a bit more user freindly but more $$
MS is a DIY. it has a lot of options, some say this is good some say it's bad.
Either one will work, it depends on what you are comfy with.
Keith
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)