Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ SOT: Bug issues

Posted by: Loser_Cruiser Apr 9 2008, 11:12 PM

I was with my neighbor today and he said he was having issues with his belt and generator. Apparently he lost an oil cooler seal, and since we are up at school we aren't allowed to work on our cars in the parking lot, so he had it repair by the shop. Well that was two months ago. Now his generator is making noises and we took a look and saw that the generator is sitting farther forward towards the front of the car than the crank pulley. What could be missing or causeing this.

Attached image(s)

Posted by: Cap'n Krusty Apr 10 2008, 12:36 AM

Wrong tin. Wrong generator. Wrong pulley. The Cap'n

Posted by: Rick_Eberle Apr 10 2008, 01:20 AM

As above...

OR, the fan shroud has gone OVER the cylinder shrouds at the rear, instead of INTO.
There is a cheese-head screw on each side of the fan shroud, where it goes into the cylinder shroud.

Loosen the generator clamp, take off the fanbelt, and jiggle the fan shroud until it pops into place... the generator should then be flat on the generator stand.

Posted by: Loser_Cruiser Apr 10 2008, 01:25 AM

ok, thanks guys I will go check tomorrow, hopefully the property nazi's don't have a power trip.