Printable Version of Topic

Posted by: Joe Mama Apr 16 2008, 09:38 PM

MIGHT need them...who has em?

Posted by: r_towle Apr 16 2008, 10:06 PM

engman

Posted by: sww914 Apr 16 2008, 10:17 PM

MarkB should have some, probably lots of them.

Posted by: 914Sixer Apr 17 2008, 06:40 AM

I have about 2 dozen of the different sizes used.

Posted by: Joe Mama Apr 17 2008, 09:14 AM

Thanks...If I need them I'll get in touch.

Posted by: Cap'n Krusty Apr 17 2008, 10:35 AM

I have 'em. Might even be able to find 'em. Just don't touch me ............. The Cap'n

Posted by: r_towle Apr 17 2008, 10:40 AM

Hi,

As I was sitting here it occured to me.......

Why not bring the car to Cap,n, have him do the suspension, alignment, and put the motor back in.

your gonna pay someone...why not have it all done at once..seems it may be more efficient.

Rich

Posted by: andys Apr 17 2008, 10:45 AM

What thicknesses do the shims come in? Also, is there a known amount of adjustment (camber) realized from each one of the sizes?

Thanks,

Andys

Posted by: Joe Mama Apr 19 2008, 10:31 PM

Krusty is the D-Jet guru.....I'm trying to keep the bill down.

Posted by: Demick Apr 20 2008, 03:26 PM

Stock come in 2mm, 3mm, and 4mm thicknesses.

I believe 2mm corresponds roughly to 1/3 of a degree camber change.