Anyone ever seen the small, like 2 inch tall Porsche badge? The standard badge is a little larger than I wanna go.....
I am keeping the badging and logos on Blondie to minimum....a simple 2.7 and the mini logo on the rear trunk area next to the push button lock.
Mike, I don't know where it came from, but my 75 had one on the hood that measures a mere 1 1/8" when I bought it. I replaced it with the official size one. Your welcome to it.
You can buy stickers.. pretty cheap.. tweeks has em
Andrew
Wasn't there a 356 hub crest about that size. I could be wrong...
Chris
The crest on the hood handle on the 356 had a small crest..
Here's what I have. regular one on the left
Attached image(s)
looks like a lapel pin or something.
Mike,
Tweeks carries the 356 hood handle crest for $20, catalog number 400-593.
Thanks.
Hey Mike,
You can buy the smaller version at Pelican. LOL
Honest.
...vew
Eddie's first in line to buy! LOL
has the last one.
Price is only $499.99 (plus shipping)
2 inches TALL....not the length of Alfred's winky......
Here is an odd Porsche crest, sivler (alum.) and black, no pins on the back.
Attached image(s)
Oh, btw, it is the stock size for the front trunk, 2 5/8 X 2 inches.
Phil
Attached image(s)
that would look good on the front of my car.
Sean, That would look great on the silver car
Classy...where'd ya get it Phil?
Mike,
I got three of them from Road & Race in L.A. back in November. I wanted one for my project car, which will be painted black, sold one on eBay for $43.00 and have one I don't need. I think I paid $28.00 each, even though they have no mounting pins and rubber base seals. I figured I would epoxy a single aluminum binding post to the center of the back of the crest, drill one hole and use the binding post screw to torque it securely to the trunk lid. I have an extra base seal I can use. Here is a pic. of the items:
You got the extra crest, Mike, $30.00 mailed, if you want. Or anyone can buy for about the same price from Road & Race. They are in the book and have a web site.
Phil
Attached image(s)
BUMP
phil, still got the crest?
I just put it on eBay a few minutes ago along with another 12 auctions spaced every 5 minutes. If there remains no bid, I will pull the auction and sell it for the opening price plus shipping.
Phil
That silver crest looks suspiciously like the ones they put on the intake manifolds on 928s....
Here's the one I got for Blondie from a nice 914 club member.....
Thanks to vsg914
Attached image(s)
Damnit! You should have asked!
I could have made a 914 2.7 emblem, with the clois emblem where it's SUPPOS'D DA BEE, and the right size.
Go look at 916 ass.
M
You can too... you just take a 914 emblem, a 2.4 emblem, and you have a starving jewler artist in town make one in shitty silver.
I had a 914-383 made for my v8, with the red inset V behind the 383. It's cheap if you make a positive model in casting wax, and supply your own metal.
I can make them, if the engine badge was available, as a model. How much is the cheapest regular old metal emblem now?
If you want to spend about $10,000, I can get all the trim in silver.
M
Miles....how about sumthin for a 3.6 badge?
Also what up with da seals?
Good news, just found the other rear side seal, now we are a single top side seal from a set, gimme a lil while... but IT IS HERE.
You need them pronto?
M
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)