Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Screeeech!

Posted by: dandh May 2 2008, 02:27 AM

Got most of the stuff I'm going to need for the big brake change this wk end,rotors,seals,calipers pads,hoses,bearings, ? should I change out the m/c too ?

Posted by: SGB May 2 2008, 07:01 AM

a 19 mm MC is available which is an improvement over the stock unit.

Posted by: Eric_Shea May 2 2008, 05:12 PM

Depends... are you using stock calipers up front?

A 19mm will give you a harder pedal but it will take more effort.

You mention big and change in the same sentence. If you are going to a larger pistoned caliper up front then you should change to the 19mm

E.