Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Off topic, Hypertune programming for 'murican cars

Posted by: ! Jan 20 2004, 04:21 PM

http://www.hypertuned.com/product_info.php?products_id=842

Looking to get more power out of the wifey's 2003 Yukon 6.0.....looks like it can be used for multiple applications once programmed and removed???

Posted by: ! Jan 20 2004, 04:33 PM

Further looking into it.....They have a lock out so that it only works on the first VIN it reads ....hmmm, hey Andy think ya can hack the code??? mueba.gif

Posted by: aufaber Jan 20 2004, 06:31 PM

If you set the car back to stock it will let you use it on a diffrent car.

-Aaron G>

Posted by: LS6/914 Jan 21 2004, 09:06 AM

Hypertech & Superchips both provide excellent products. I have used them both on Yukon, Escalade & DuraMax. The software is intended for one application at a time. I would strongly advise reading the notice on Hypertechs site before trying to hack their product.

Posted by: ! Jan 21 2004, 09:14 AM

The hack part was a joke....geez. wacko.gif

Thanks for the product update.

27 hp is not a whole lot. Especially on a 3 ton Suburban Yukon.....any seat of the pants testimoninals?

Posted by: seanery Jan 21 2004, 09:31 AM

Andy....but seriously....

Posted by: anthony Jan 21 2004, 10:11 AM

QUOTE
27 hp is not a whole lot. Especially on a 3 ton Suburban Yukon.....any seat of the pants testimoninals?



I chipped my Jetta. The net result was a 5% improvement and I have to use premium gas. Sometimes I think doing the chip alone wasn't worth it but it only cost $99. Supposedly on the Jetta, if you do the cam and exhaust in addition to the chip you get a 25% bump in hp.

My recommendation would be to get it if you only need some of the other features it provides but it's probably not worth $350 or so just for small hp improvments.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)