Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ going value for CV's?

Posted by: RJMII Jun 2 2008, 10:53 AM

How much are they selling for?

Posted by: ()() Jun 2 2008, 01:29 PM

Are you selling or buying? I paid $125 EACH for NOS. Used ones? Define used....dirty cores or cleaned and inspected?

Contact Eric Shea....
ericscottShea@cs.com

Posted by: RJMII Jun 2 2008, 02:10 PM

QUOTE((*)(*) @ Jun 2 2008, 01:29 PM)

Are you selling or buying? I paid $125 EACH for NOS. Used ones? Define used....dirty cores or cleaned and inspected?

Contact Eric Shea....
ericscottShea@cs.com

Selling, cleaned and inspected.

I've got Eric's website URL memorized.

was that $125 per CV, or per axle?

Posted by: ()() Jun 2 2008, 02:32 PM

Per CV....ackkkk!

Posted by: sww914 Jun 2 2008, 03:25 PM

I sold a used one with very few miles on it (the bores weren't even shiny) for $125.00. I kind of wish I'd kept it.

Posted by: Jax914 Jun 2 2008, 06:27 PM

for a reference....I just rebuilt my CV's - new boots, cleaned and painted the axles. I had a total of 6 axles / 12 CV's - out of that I got 4 that were in pretty decent shape, 2 that became usable spares, one that didn't have a place for the 2 roll pins (where'd that come from?!) and the rest are sitting in a coffee tin with pronounced grooves so bad I didn't bother putting them back together. I even had one where the outer edge of the cage was broken.

If you've got usable ones hang on to them.....

Posted by: RJMII Jun 2 2008, 07:25 PM

QUOTE(Jax914 @ Jun 2 2008, 06:27 PM)

for a reference....I just rebuilt my CV's - new boots, cleaned and painted the axles. I had a total of 6 axles / 12 CV's - out of that I got 4 that were in pretty decent shape, 2 that became usable spares, one that didn't have a place for the 2 roll pins (where'd that come from?!) and the rest are sitting in a coffee tin with pronounced grooves so bad I didn't bother putting them back together. I even had one where the outer edge of the cage was broken.

If you've got usable ones hang on to them.....

I'm guessing a type 1. If you look at Eric's site he has the T1 CV's machined to have the roll pins and this little change makes them a T4/914 setup? or something like that. $90 for a new one through Eric's site. (give or take a few $ for shipping)