when i step on the clutch - my rpm changed slightly for a split second and i can feel a click at the peddle - i have them interacting with each other ??
any ideas?
jim
This is a very common problem.
Use a mirror and remove the front tunnel cover.
The accel cable is looped once over the clutch cable.
The issue is in front of the shifter...
If you use a mirror from the front, you can see it.
The fix is to unclip the accel cable and using long things like coat hangers or whatever you can...unloop it.
I take out the shifter also...its alot easier to look from the mirror up front, but reach in from the shifter side...
Rich
I struggled with this problem for a while. In my case my engine would spike when I pushed in the clutch. Not only were the cables intertwined but I was also getting interference at the end of the cables. What a PIA. Good luck!
thanks guys : )
jim
luckily my front cover is always off and i roll with no carpeting at all - i looked in with a mirror and small light and can easily see the twist - i popped off the throttle cable at the peddle assy bell crank - looped it under the clutch cable and reconnected it to the bell crank - all is good now - thanks - jim
Glat it worked out so easy for you
So what's with your big honkin picture in each post? Are you selling Real Estate or do you think you're pretty or somthin?
that is funny - i just started selling real estate and am using this old pic : ))
but i posted the pic hoping others would follow - as it would be nice to be able to put a face with a name. ok - i will put up a more recent and more grease-under-fingernails pic up instead : ))
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)