Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Vaccume Advance Canister question
Posted by: tod914 Jun 11 2008, 03:24 PM
The one port (closest to the rear of the car) on the canister is crimped closed.
Should I uncrimp it/snip off the tip? Does it effect the running of the car either way.
The TB only has the one port for vaccume line attachment and that is going to the forward port (front of car).
Thanks,
Tod
Posted by: SirAndy Jun 11 2008, 03:34 PM
QUOTE(tod914 @ Jun 11 2008, 01:24 PM) 
The one port (closest to the rear of the car) on the canister is crimped closed.
Should I uncrimp it/snip off the tip? Does it effect the running of the car either way.
The TB only has the one port for vaccume line attachment and that is going to the forward port (front of car).
the factory left it open. they had a hose on it that was just tucked under the TB and left hanging there.
so i'd say revert it back to factory specs.
Andy
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)