Would this be a useful tool for us? It would be a form sorta like the rental car agencies use to show existing damage only more detailed and specific to the 914. The form would benefit all parties to a transaction to more fully document the condition of a 914 to avoid misunderstandings and worse. I wish I had something like this on previous buys.
I envision a multipage form that is filled out by an owner, buyer or PPI inspector to document the condition of a given 914. Use it as a disclosure statement to a buyer, and a basis for negotiating a fair price. 914s are special interest cars now, with buyers finding cars far away where they cannot be personally inspected.
The form would have simple line diagrams including all 4 sides of the car, a plan view looking down from the top, a plan of the bottom and interior views – all to be drawn upon and conditions noted. A buyer could insist that the seller fill it out (for full disclosure) or better, pay a PPI inspector to complete. A proactive seller would furnish it without asking as a sign of good faith. The form could be a free benefit (downloadable .pdf) of belonging to this fine forum. The form could be used as evidence to document a car before it is shipped in the event of shipper-caused damage.
In addition to the diagrams a checklist of items to verify and room for comment would be included, covering everything from what is included in the sale (a list of extra parts and paperwork), the oil change/valve-adjustment history, to anything else the owners wishes to list ‘the top leaks and squeeks’, the registration expires in October’, ‘COA included’, etc.
Specific condition items could easily be documented with this form that often get overlooked, with as much care as the inspector can supply, that often affects a 914s value.
A basic level of inspection/documentation would be visual only and only cover things that can be observed without tools, lifts or removing any parts:
-Curb rash on wheels
-Non-op lighting/electrical mechanical system flaws
-Body/trim/glass/weatherstripping/lenses – every chip/ding/scrape/flaw/rust bubble
-Upholstery tears, carpet wear
-Remaining tire tread
-Shock absorber function
-Driving test impressions
-Non-stock or upgraded equipment
-Missing/worn parts and funky repairs
-Overall impression of cleanliness and maintenance
-General classification of car as ‘show-driver-race-repairable-parts car’
A more thorough inspection/documentation would require additional time, tools and access which would most likely be done in a shop:
-Underbody cleanliness or damage if a lift is available
-Oil/brake fluid leaks
-Brake rotor/pad thicknesses
-Compression/leakdown tests
-Exhaust system rust
-Suspension/steering bushing wear
-Rocker panel/Hellhole condition
With the most complete reports, detailed photos of critical areas can be included with the report.
Attached image(s)
That is actually a real cool idea. Especially for people buying cars sight unseen.
Then you could know what needs fixing and where to put the jackstands first
Great idea Jeff!
Maybe something like they use for insurance adjusters.
That is one of the best ideas I have heard in a long time Jeff!
Geez Jeff. Just when I think you're gotten old and senile you come up with another really great idea!!!
Let me know if I can be of assistance.
Eric Read
Absolutely.... great idea.....
-- Rob
Fantastic idea! Could we add views inside the engine compartment and the two trunks?
Perhaps the form could point the reviewer toward some known weak areas-
-condition of rocker panel/ longitudinal area
-cylinder head condition (possible exhaust leaks, stripped spark plug holes, existance of heli-coils, etc)
-slop in shift linkage
-1st/reverse synchros
-trunk hinges
just a thought.
This is what a PPI is all about.
No form should be needed for a dedicated and knowlegable person providing this service.
A PPI is typically only done by someone with a long history of working with these models. It should be very detailed, and cover all body, mechanical, and authenticity issues in detail.
This is why a real PPI costs money, $100 or more depending upon proximity...and the cost is not based upon weather you buy the car.
This is a professional service, not a money maker...
In the 356 world, a PPI is typically done by a thrid party with 10-20 years experience working on 356's...either as an owner or restoration shop. A typical PPI is not done by a person that has not taken one of these cars apart and restored it...that is the only way to know ALL the potential issues...
Also, at this stage of the market, we should be locating and providing a list of PPI service providers that have credentials to back up a PPI. This is more important than a standard way of doing a PPI...its pretty standard if you have had a few done.
Expect a real PPI to be alot more detailed, with pictures, than any form could cover.
Each car is different, thus a PPI.
To build respect for the model, a PPI network of knowledgable and thorough reputable inspectors should be listed, like on the 356 registry.
If you want a PPI, there is a list based upon location.
Rich
Personal opinion follows: Ed Mayo, Mark DeBernardi, Clay Perrine.
Cost is what it is.
The business providing the PPI dictates the price.
Bottom line is that this is a service offered for classic cars.
There is not standardised list or format because then the list creator is liable..
You want the PPI service provider totally liable for what they include/dont include in a professional PPI.
The list of PPI service providers should not be a thread, but should be a pull down list at the top of the 914info section.
I forget where it is, the the 356registry has a section with all PPI volunteers.
Do not add any names to the list if that person has not agreed.
Yes, its business, but its not bread and butter business.
It can be a PITA some weeks if its busy.
To do a good PPI, yes it takes a few hours...could be three or four hours depending upon the initial inspection results.
The car must go on a lift, it must be driven etc etc.
Rich
It would end up being easier to find the names in the long term versus searching a thread.
Your one of the admins, so your opinion counts as to how its implemented.
We are, for all intents and purposes, serving the function of a 914 registry...at least we are a centralised (two sites) place to go look for thse types of things.
Maybe Jeff could host a list on his site...he has a format that suites the need.
I am not sure if I was clear above...
Please consider asking anyone before claiming that they do PPI as a service...some people/business's like to do them, some dont.
Rich
One other note. IMHO, the checklist should be published on this board and be available to all. Any list of "qualified" inspectors should not be tien to this list and should be provided as a seperate item. The problem with listing "qualified" inspectors is that without a testing and certifying body, there is no way to qualify or certify persons as being qualified.
Any liability really lies in suggesting persons that may or may not be qualified to perform these inspections. While the list being proferred is actually pretty good, I'm not sure George Hussy or some of the other listees really want to be called to perform PPI's on a regular basis. Or would you let the Qulaified Inspector assign delegates to perform the PPI in his/her name?
The Qualified Inspector part is, in my opinion, not without liability. It also risks removing some very qualified persons from consideration from performing this service.
I say, let's start with the checklist, and look to naming qualified Inspectors as a second phase of this project.
Eric Read
simple, start a thread where people can post qualified shops/persons for doing PPIs and add a link to that thread in the "914 Info" section.
that way, you never have to search for the thread ...
now, as far as the form goes, i think it's a great idea. i could have used one on the last two PPIs i did.
now matter how often you've done this, a checklist is always beneficial. i'm not getting any younger.
and we can host the form here as well for people to download and print out ...
Andy
Good idea.
what they said
Another brilliant innovation Count me in if I can help at all. We could start a quick reference library of pics of the trouble spots.
I think the form is a great idea.
I'm going to look at a '73 2.0 tomorrow that was found in a barn and a what to look for guideline would be perfect.
If I had a guideline several years ago, I might not have bought my car or I may have anyway.
The '74 2.0 is still in a process of
Here is a first conceptual 7 page DRAFT for initial comments and input, in page order. Don't be too nit picky yet...please...but helpful comments are welcome.
Attached thumbnail(s)
Also,
A list of standard pictures suitable for evaluating a car's condition would be useful.
Examples of how the pictures should look when taken, maybe even a picture of someone TAKING the picture.
How many times is the rear trunk shot from the rear, with the pad in place, not revealing the rust right under the taillights? Or, need pics of the front trunk with the board AND the spare removed? Standardized angles of the engine compartment, etc.
It would at least be useful among members of this board.
Paul
I would take a more open approach to the uses of such a tool than Rich, though I very much respect his opinion regarding shops that do PPI. I think something like this has several uses besides a tool for shops doing PPI. I would love to have it to do a self-assessment on my own car. I would love to have it if I myself were looking at another 914 as a prospective purchase. It also could compliment a log a person keeps of progress on a project. This tool guides the way you look at the car. Even if it is your own car!
Very nice idea Jeff...
Very nice. I think this could be very valuable. Thanks for developing this.
Hi Jeff!
I used your draft form this weekend for a PPI for the good Doctor Evil.
After I got through the numbers, I started to struggle with the form. It's organized into sections... but perhaps I struggled because it's not how I do a PPI. For example, I don't check mechanicals after I drive the car. Why? First, I refuse to drive a deathtrap. Second, the car is too hot to check after a spirited drive!
I'd suggest some reorganization, based on a logical sequence of inspecting the car:
1. Record Keeping: Check all serial numbers (don't forget rear trunk), engine size, milage, etc.
2. Engine compartment checks. Oil, firewall, battery tray, battery type, hellhole, etc.
3. Vehicle walk around: Checklist for each panel or trunk, organized in a 360 degree tour of the car. Panel gaps. Common checks for rust. Include bumpers and other major brightwork.
4. Interior checks. Wiring under dash, pedal cluster, floorboards, seatbelt mounting points, dash lights, horn, wipers, general condition. etc.
5. Wheels, brakes, suspension, brake hoses for bulges cracks or leaks.
6. Electrical. Check headlights, fog lights, brake lights, turn signals.
7. Driving impressions. Steering, throttle response, brakes, parking brake, gauge operations.
Anyway, just a suggestion... worth exactly what you paid for it.
Thanks for all your hard work on this and so many other projects.
-Rusty
Thanks for the great feedback Rusty. Several of the items including the re-org I was already on for the next beta version, the first draft was very rough. I will include revisions from your comments in the next version.
REALLY glad you used it and found it helpful. Looks like your Dr Evil PPI was incredibly detailed. I hope the form was a relatively convenient way to record your observations. Teh form may not reflect a linear PPI process, but the idea is to have the major bases covered. Every one of our 35 year old 914s is unique in terms of condition and so hopefully the form will prompt a more careful evaluation of each cars condition.
ALL: Note that the form is only a blank piece of paper to record your observations, its not intended to be a comprehensive checklist of everything to check... An experienced 914-er like Rusty will likely see more and record more than someone not so experienced...therefore you get what you pay for, the PPI is only as good as the person preparing it. 2 hours for visuals only, it was a great PPI, and great PPIs take time even for the best.
Top notch work and great feedback on organization as well. Definitely puts objectivity in front of you, instead of the subjectivity of the heart when evaluating a purchase. Thanks.
Here is the latest revision of the assessment form as V0.2 beta, its text only for this release, now I will get to work on the diagrams which will be included with V.03 beta. Thanks to Rusty and everyone else for the previous comments, most are incorporated. 3 pages of text only, dowload them and pirint for best quality.
Speak up on anything you see here...please...
Uno, dos.
Attached thumbnail(s)
I think it's an awesome idea.
Outstanding as usual Jeff.
Well done!
I was thinking that you could add a small scale to the side or bottom of one page to use as a tread depth gauge. Stick that part of the paper into the tire tread and mark how high it is right on the sheet. You wouldn't need to get and carry a separate depth gauge.
Damn!!! That looks really, really good. I think I'm going to do a PPI on my car just to document where it is today. This might be a very good tool to use annually to ensure any insurance claim is represented correctly.
BTW: Any movement on the earlier idea to provide a list of preferred photos?
Eric Read
Where would you put a list of components if it was a track car? like thicker torsion bars, aftermarket sways, springs, perches, non stock brakes, non-stock transaxle and axles, clutch, cooling...?
Just throwing thoughts out there. =)
Great idea BTW.
Add a column heading for shocks and tires labeled "Brand" next to the size and tread columns so you can list Koni shocks or BFG tires. Also add it to any other spot where it might be useful to know like wheels.
Edit: I went back and saw there is no section for wheels. We definitely need a size, brand, and number lugs for the wheels. Add caps to that too to indicate whether they are missing or damaged.
exactly, because I would think a prospective buyer would like to know that i've got 110mm CV's (the largest you can fit through a stock swing arm)
Another example. Sir Andy's 944/911/914 Frankenstein axles...
Interesting ideas... but if I can't verify it with my own eyes (i.e. new heads, new 1st gear, bigger torsion bars, etc), I will put the entry into the Owner Interview.
So here is version 0.3 beta for comments...7 pages.
Content ok? The graphics need to be refined, but how are they otherwise?
Attached thumbnail(s)
I have posted my Condition Assessment Form v1.0 at a link on my website at this link. Download, print, and use it, let me know what you think. Would be happy to provide a copy to load onto the 914world if I knew how to do it. Will update as needed.
http://members.rennlist.com/914_collectibles/
and
That's all I have to say.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)