Printable Version of Topic

Posted by: Thomas J Bliznik Jun 27 2008, 10:06 PM

Hi All,

Ok, not a barn find, but in my travels today I ran accross this 1966 912 rust bucket someone might be interested in. I have no interest in this project/parts car, just passing it on.

Here's what I know,
The owner Buck @ Automotive Werks in Kalamazoo, MI is closing his shop due to a divorse & selling out. He was thinking he wanted $1,000.00 for the car but will take $800 or ?? to get it out of the yard because the building is sold. He needs it out ASAP.

1966 912 vin # 456019 of (3630) built in 1966.
5-speed, valid title, lots of original rust, etc. see photo's
Buck's cell phone# (269) 341-0930

Tom




Attached thumbnail(s)

Posted by: Thomas J Bliznik Jun 27 2008, 10:08 PM

Page #2

T


Attached thumbnail(s)

Posted by: Rusty Jun 27 2008, 10:09 PM

I was in Kalamazoo less than two weeks ago.

Posted by: Thomas J Bliznik Jun 27 2008, 10:16 PM

QUOTE(Rusty @ Jun 27 2008, 08:09 PM)

I was in Kalamazoo less than two weeks ago.

Posted by: cooltimes Jun 27 2008, 10:20 PM

5 bolt wheels should be worth that asking price. Looks more restorable than some 914's I have seen too.

Cooltimes

Posted by: Rusty Jun 27 2008, 10:20 PM

I need my nose recalibrated...

Posted by: euro911 Jun 27 2008, 10:30 PM

Oh, come on now ... that'll buff out

The engine is worth more than the asking price

Posted by: cooltimes Jun 27 2008, 10:37 PM

oops.
same post I did earlier.

Cooltimes

Posted by: Thomas J Bliznik Jun 28 2008, 12:01 PM

Attn: Parts experts??

I had a couple of questions come up from an interested party who may be interested. I don't know the answer & wondering if anyone knows on this forum??

Can the engine & transmission be used in a 356??

Can the horn ring be used on a 914 steering wheel??

Will the steering wheel fit a 914??

T




Attached thumbnail(s)

Posted by: euro911 Jun 28 2008, 12:10 PM

QUOTE(Thomas J Bliznik @ Jun 28 2008, 11:01 AM)

Posted by: r_towle Jun 29 2008, 09:46 AM

Motor can be used in a 356, but it has a different third piece on the case.
There are replacement third piece cases out there, so it can be made to look correct.

Its basically the 356 SC architectecture, so its the fastest and most HP out the motor...its a nice revving motor.

The tranny can be made to fit into a 356, but its a BIG project.
the 356 is a solid axle setup, the 912 is an independant setup...a bit of work will get it to fit...I am doing it.

Steering wheel looks like the early 911/912 which is the same as the 914 and can be cleaned up and sold to an eager buyer..

Overall, its a great deal if someone wants to part it out.
If it was closer, I would be there in a heartbeat with a trailer...
I love the 912 and depending upon overall level of rust, I would probably weld it back together...

Rich

Posted by: euro911 Jun 29 2008, 11:30 AM

[quote name='r_towle' date='Jun 29 2008, 08:46 AM' post='1050578']

The tranny can be made to fit into a 356, but its a BIG project.
the 356 is a solid axle setup, the 912 is an independant setup...a bit of work will get it to fit...I am doing it.

I was answering 'NO' as if someone was asking "can I just bolt this tranny in and go?" ... its more work than a lot of folks would care to tackle.


Rich - post some pix of your conversion



Steering wheel looks like the early 911/912 which is the same as the 914 and can be cleaned up and sold to an eager buyer..

HEY! I was eyeballin' that primo horn button



... If it was closer, I would be there in a heartbeat with a trailer...

Yeah, me too ... but I don't think my wife would be real happy if I brought another stray home


Attached image(s)

Posted by: KaptKaos Jun 29 2008, 02:03 PM

If you were out here, I'd have the cash in your hand.

I'd love that car, but shipping it to cali would be prohibitive (to me).

Posted by: Dr Evil Jun 29 2008, 02:59 PM

Dang, if that was local I would own it. It looks salvageable.

Posted by: fitsbain Jun 30 2008, 09:33 AM

Mike -

Want to pay gas and I'll go get it for ya?

Posted by: tdgray Jun 30 2008, 09:45 AM

Anybody know if it is still available... I might be interested.

Posted by: Root_Werks Jun 30 2008, 09:50 AM

I know some 356 guys that have paid bucks for good engine cases. They are getting harder to find. It looks worth restoring to me.

Posted by: Dr Evil Jun 30 2008, 12:08 PM

QUOTE(fitsbain @ Jun 30 2008, 11:33 AM)

Posted by: Dr Evil Jun 30 2008, 12:10 PM

Just called, its sold

Posted by: euro911 Jun 30 2008, 12:44 PM

Yeah, sorry guys, I couldn't resist - had it shipped out here yesterday, cleaned it all up and I'm driving it now






Attached image(s)

Posted by: Thomas J Bliznik Jun 30 2008, 12:58 PM

Hey Mark, you are funny.

I talked to Buck & the 912 is being picked up tomorrow by a 356 guy in mid-Michigan. Buck received a deluge of calls & thanked me for my help. Buck told me he will soon go into his attic/rafters and pull out parts that's been in storage many years to sell. I know he has a 2.7 liter engine & I'll probably hear from him when he has things sorted out.

Dr. Evil!!!!!
Here's a secrete message for your ears only. Call George Hussey @ AA & ask him about the "Blue Mary's Car" . I gave him a lead on this beauty a while ago & when I went by the boarded up bldg, the door was still sealed. I am thinking George didn't move on the deal. It's a real one owner 34K milage 914, rust free. Here's a peak at the car (photo).

Tom


Attached thumbnail(s)

Posted by: Thomas J Bliznik Jun 30 2008, 07:30 PM

QUOTE(Thomas J Bliznik @ Jun 30 2008, 10:58 AM)

Hey Mark, you are funny.

I talked to Buck & the 912 is being picked up tomorrow by a 356 guy in mid-Michigan. Buck received a deluge of calls & thanked me for my help. Buck told me he will soon go into his attic/rafters and pull out parts that's been in storage many years to sell. I know he has a 2.7 liter engine & I'll probably hear from him when he has things sorted out.

Dr. Evil!!!!!
Here's a secrete message for your ears only. Call George Hussey @ AA & ask him about the "Blue Mary's Car" . I gave him a lead on this beauty a while ago & when I went by the boarded up bldg, the door was still sealed. I am thinking George didn't move on the deal. It's a real one owner 34K milage 914, rust free. Here's a peak at the car (photo).

Tom

Posted by: Dr Evil Jun 30 2008, 08:44 PM

Dang, I cant move on any thing until this weekend. I am studying (really, I am) for 3 tests this week

PM me any info you have and I will call George when I get a chance.

Posted by: carr914 Jun 30 2008, 09:19 PM

Mike I know George is at Parade. If you need I can get a message to him through Steve Gaglione.

T.C.

Posted by: Dr Evil Jun 30 2008, 09:26 PM

That would be cool, TC. Thanks!

Posted by: bd1308 Jul 1 2008, 07:33 AM

I would kill for a 912 to drive around.

Posted by: Root_Werks Jul 1 2008, 07:57 AM

QUOTE(bd1308 @ Jul 1 2008, 06:33 AM)

Posted by: carr914 Jul 1 2008, 11:23 AM

Dr Evil, I just talked to George and you have a pm from me.

T.C.

Posted by: Dr Evil Jul 1 2008, 05:41 PM

The blue car sold last week Dang, missing left and right. Gotta keep trying, though.

It was nice talking to you, Tom

Posted by: carr914 Jul 1 2008, 06:16 PM

Damn Mike, I just heard Maxwel Smart say it again...You missed it by this much

T.C.