I've got a '74 (made 10/73) 914 and I need someone to tell me what wires/colors go to the turn signal indicator lights in the tach. I'm using a six cyl. tach, and I have two type of indicator light sockets to use. I've looked at a '73 & '75's wiring and neither one seems to be like my '74. Does anyone know the correct colored wires to us on a '74? Thanks in advance.............JT
Come on 914 owners, there must be plenty of '74 owners with a digital camera or someone who can pull out their tach enough to check the color and number or wires on the turn signal indicators................Waiting for some help teeners............
this is all i gots
My 75 turn indicators wire is white with a blue stripe...only one wire. The 74's have two for two indicators. This http://www.914club.com/bbs2/index.php?showtopic=47236&st=0 may help you.
it looks like mine is blue, with a white stripe, but that wouldn't be consistant with Mark.
i can't look into it just now though...
The 74 only had one turn signal indicator in the tach, just like the 75s and 76es. A few of the early-early 74 had 73 tachs, with two indicator lights in the tach. But they were wired up to the single existing signal wire, so both would flash at the same time.
--DD
I thought that the flasher relay worked the emergency lights and the turn signal lights. My emergency four way lights work and the relay clicks. The left and right front and rear lights come and stay on with key off when the turn signal lever is in the left or right position. I know that they are supposed to do this. My problem is that the turn signal lights front and rear do not work when the key is on and the lever is in the left or right postion.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)