Looking for the stock deck height (a range is fine)
2.0 liter motor..flat or dished ....just top of piston measurement.
Rich
Mark...know this one?
Trying to figure this out on paper first before I spend any money on rods or a crank..
Rich
Based on these numbers:
Bore- 94
Stroke- 71
Combustion Chamber- 61ccs
Compression- 7.6:1
The deck height comes out to 0.077". This is USA spec info which used a flat top piston IIRC.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)