anybody know what size (mm) the stock tire wrench is?
I need to find something 19mm to put into this car for emergency use
brant
You said it. 19mm.
The Cap'n
get a 1/2 drive breaker bar and a 19mm (or 3/4) impact socket. most bullet proof lug wrench on the planet
Thats what I have . . . It also doubles for a breaker with a socket for the steering wheel since I've had to take that off in parking lots to get to the switch way too many times lately.
Note that some of the popular replacement lug bolts use 17mm heads, even though the stock ones have 19mm heads.
--DD
I thought that the stock setup was both 17mm and 19mm on the actual wrench portion of the unit.
Mine is a 10mm roundbar with a small bend in the end.
The second piece is a hollow tube with 17mm on one end and 19mm on the other end.
Its purely for emergency, but I think it would also take out a sparkplug.
Rich
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)